Looking for information/value on Sterlingworth

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Judge Carter
Posts: 2
Joined: Fri Sep 24, 2010 10:39 am

Looking for information/value on Sterlingworth

Post by Judge Carter »

I acquired a 12 ga. Sterlingworth double gun a few years ago. It is marked on the barrels with (left side) Made by A.H.Fox Gun Co. Phila PA, USA and (right side) Sterlingworth Fluid Compressed Steel. It has 30" barrels with matching SN 1194xx in all three standard locations. The receiver is marked just the SN and the patent dates: Aug 15-04, Aug 1-05, Jan ???, May 11-09May 2-11 and June???. The sides are marked "sterlingworth" on both sides. (Not "The Sterlingworth Co.") Barrel flats are marked with a pointed square followed by the SN. Both barrels are stamped the a "2".It has a half pistol grip, a few minor wood dings, but otherwise very good.Checkering is clean with no defects, and flat-topped diamonds. Barrels show no pitting, but some discoloration. Finish appears to be 90-95%. Bores are both like mirrors with no visible pitting. From the SN, I think the date should be 1928.

1. Is it shootable with modern shells or should I load light?
2. Any estimate of value? Best I get from reading posts is about $800.
I have no intention of selling, but I would like to take a few pheasants this fall.

Pictures attached
Attachments
IMG_2678.JPG
IMG_2678.JPG (29.95 KiB) Viewed 8631 times
IMG_2677.JPG
IMG_2677.JPG (35.4 KiB) Viewed 8631 times
IMG_2672.JPG
IMG_2672.JPG (34.09 KiB) Viewed 8631 times
Judge Carter
Posts: 2
Joined: Fri Sep 24, 2010 10:39 am

Re: Looking for information/value on Sterlingworth

Post by Judge Carter »

Additional pictures
Attachments
IMG_2688.JPG
IMG_2688.JPG (34.57 KiB) Viewed 8630 times
IMG_2679.JPG
IMG_2679.JPG (37.14 KiB) Viewed 8630 times
IMG_2685.JPG
IMG_2685.JPG (33.42 KiB) Viewed 8630 times
fullchoke16
Posts: 426
Joined: Fri Jan 05, 2007 11:17 pm
Location: Western PA
Been thanked: 1 time

Re: Looking for information/value on Sterlingworth

Post by fullchoke16 »

Judge,$800 would be a good guess on value. The most common length barrels on 12 gauge Sterlingworths was 30" with typical chokes being full and modified. I have one in the same # range as yours and I've pretty much shot anything I wanted through it with the exception of steel. If you intend any high volume shooting your shoulder and the guns stock will prefer light loads, otherwise, I wouldn't worry myself too much about it. Fred
Recoil is most noticed when I miss
sailor
Posts: 5
Joined: Sun Oct 03, 2010 2:16 pm

Re: Looking for information/value on Sterlingworth

Post by sailor »

Hi,

Same here. I have a Sterlingworth, made by A.H. Fox Gun Company, Phila, PA, USA....16g serial# 353405. I'm looking for information about it. If you could help I would be very grateful.

Thank You,

Sailor
fullchoke16
Posts: 426
Joined: Fri Jan 05, 2007 11:17 pm
Location: Western PA
Been thanked: 1 time

Re: Looking for information/value on Sterlingworth

Post by fullchoke16 »

The approximate manufacture date on your 16 would be 1917. The typical 16 bore Sterlingworth will likely have 28" barrels and be choked mod. and full. 16's were built on the small frame that was used for the 16 and 20 both. The frame will be much slimmer than a 12 gauge gun and about a pound lighter.
Recoil is most noticed when I miss
sailor
Posts: 5
Joined: Sun Oct 03, 2010 2:16 pm

Re: Looking for information/value on Sterlingworth

Post by sailor »

Thank U Fullchoke. Any idea on a value?
George Lander
Posts: 412
Joined: Fri Oct 12, 2007 2:18 am
Location: Lexington, South Carolina
Contact:

Re: Looking for information/value on Sterlingworth

Post by George Lander »

Sailor: I agree w/ fullchoke on the value of a 12 bore SW. A 16 bore would probably bring @ 50% more in the same condition.

Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
sailor
Posts: 5
Joined: Sun Oct 03, 2010 2:16 pm

Re: Looking for information/value on Sterlingworth

Post by sailor »

Thank you George.

I'm just getting started in this and find the history exciting. If I understand, my 16 Gauge is worth +/-50% more than the 12 gauge? Where or how may I determine the monetary value for this piece?

Kind Regards,

Sailor
birdawg
Posts: 1024
Joined: Mon Apr 02, 2007 11:50 am
Been thanked: 2 times

Re: Looking for information/value on Sterlingworth

Post by birdawg »

If you put it on gunbroker without a reserve the selling price will be it's value.
"I have more than I need, but not as many as I want"
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
sailor
Posts: 5
Joined: Sun Oct 03, 2010 2:16 pm

Re: Looking for information/value on Sterlingworth

Post by sailor »

Thank You .....
birdawg
Posts: 1024
Joined: Mon Apr 02, 2007 11:50 am
Been thanked: 2 times

Re: Looking for information/value on Sterlingworth

Post by birdawg »

You can also look at the completed auctions and find a similar item.
"I have more than I need, but not as many as I want"
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
jolly bill
Posts: 1517
Joined: Sun Jan 21, 2007 10:06 pm
Location: Western NY
Has thanked: 1261 times
Been thanked: 430 times

Re: Looking for information/value on Sterlingworth

Post by jolly bill »

As a market indicator, at the Rochester NY gun show a week ago, there was a 12 gauge Philadelphia Sterlingworth walking around that was at least as good looking as your S'worth. The guy was asking $650.00. Not sure if he sold it.

Jolly
fullchoke16
Posts: 426
Joined: Fri Jan 05, 2007 11:17 pm
Location: Western PA
Been thanked: 1 time

Re: Looking for information/value on Sterlingworth

Post by fullchoke16 »

Just thinking about the current market, I believe that's a good observation. Entry level guns will take more of a hit in a poor economy. Nice CE and XE guns will always hold their price. On the 16 gauge, I'd agree with George at +/- 50%. You can pretty much double the price when you get to a 20 gauge. Fred
Recoil is most noticed when I miss
sailor
Posts: 5
Joined: Sun Oct 03, 2010 2:16 pm

Re: Looking for information/value on Sterlingworth

Post by sailor »

Thank you all. Keep the info coming.....
ASavageFox
Posts: 552
Joined: Thu Feb 05, 2009 8:23 pm

Re: Looking for information/value on Sterlingworth

Post by ASavageFox »

Sailor,

With out seeing your gun, its really hard to say... I have seen SEVERAL 16 gauge sell for well under $1000 but also saw one sell for around $1800 despite having had a $1200 buy it now price when originally listed.

Condition is a huge factor on price... only the highest of condition SWs are valuable to collectors (or the few exceptionally rare versions), the rest are all shooters. Lots of other things effect value, barrel length, ejectors/etractors, stock dimensions, etc. $600-about $2200 is about the range for a 16 gauge from what I have seen. I could think of 16 SWs configurations and condition that could command well over $2200 but have never seen it.

Just my $.02
Cheers!
Post Reply