Looking for information/value on Sterlingworth
-
Judge Carter
- Posts: 2
- Joined: Fri Sep 24, 2010 10:39 am
Looking for information/value on Sterlingworth
I acquired a 12 ga. Sterlingworth double gun a few years ago. It is marked on the barrels with (left side) Made by A.H.Fox Gun Co. Phila PA, USA and (right side) Sterlingworth Fluid Compressed Steel. It has 30" barrels with matching SN 1194xx in all three standard locations. The receiver is marked just the SN and the patent dates: Aug 15-04, Aug 1-05, Jan ???, May 11-09May 2-11 and June???. The sides are marked "sterlingworth" on both sides. (Not "The Sterlingworth Co.") Barrel flats are marked with a pointed square followed by the SN. Both barrels are stamped the a "2".It has a half pistol grip, a few minor wood dings, but otherwise very good.Checkering is clean with no defects, and flat-topped diamonds. Barrels show no pitting, but some discoloration. Finish appears to be 90-95%. Bores are both like mirrors with no visible pitting. From the SN, I think the date should be 1928.
1. Is it shootable with modern shells or should I load light?
2. Any estimate of value? Best I get from reading posts is about $800.
I have no intention of selling, but I would like to take a few pheasants this fall.
Pictures attached
1. Is it shootable with modern shells or should I load light?
2. Any estimate of value? Best I get from reading posts is about $800.
I have no intention of selling, but I would like to take a few pheasants this fall.
Pictures attached
- Attachments
-
- IMG_2678.JPG (29.95 KiB) Viewed 8633 times
-
- IMG_2677.JPG (35.4 KiB) Viewed 8633 times
-
- IMG_2672.JPG (34.09 KiB) Viewed 8633 times
-
Judge Carter
- Posts: 2
- Joined: Fri Sep 24, 2010 10:39 am
Re: Looking for information/value on Sterlingworth
Additional pictures
- Attachments
-
- IMG_2688.JPG (34.57 KiB) Viewed 8632 times
-
- IMG_2679.JPG (37.14 KiB) Viewed 8632 times
-
- IMG_2685.JPG (33.42 KiB) Viewed 8632 times
-
fullchoke16
- Posts: 426
- Joined: Fri Jan 05, 2007 11:17 pm
- Location: Western PA
- Been thanked: 1 time
Re: Looking for information/value on Sterlingworth
Judge,$800 would be a good guess on value. The most common length barrels on 12 gauge Sterlingworths was 30" with typical chokes being full and modified. I have one in the same # range as yours and I've pretty much shot anything I wanted through it with the exception of steel. If you intend any high volume shooting your shoulder and the guns stock will prefer light loads, otherwise, I wouldn't worry myself too much about it. Fred
Recoil is most noticed when I miss
Re: Looking for information/value on Sterlingworth
Hi,
Same here. I have a Sterlingworth, made by A.H. Fox Gun Company, Phila, PA, USA....16g serial# 353405. I'm looking for information about it. If you could help I would be very grateful.
Thank You,
Sailor
Same here. I have a Sterlingworth, made by A.H. Fox Gun Company, Phila, PA, USA....16g serial# 353405. I'm looking for information about it. If you could help I would be very grateful.
Thank You,
Sailor
-
fullchoke16
- Posts: 426
- Joined: Fri Jan 05, 2007 11:17 pm
- Location: Western PA
- Been thanked: 1 time
Re: Looking for information/value on Sterlingworth
The approximate manufacture date on your 16 would be 1917. The typical 16 bore Sterlingworth will likely have 28" barrels and be choked mod. and full. 16's were built on the small frame that was used for the 16 and 20 both. The frame will be much slimmer than a 12 gauge gun and about a pound lighter.
Recoil is most noticed when I miss
-
George Lander
- Posts: 412
- Joined: Fri Oct 12, 2007 2:18 am
- Location: Lexington, South Carolina
- Contact:
Re: Looking for information/value on Sterlingworth
Sailor: I agree w/ fullchoke on the value of a 12 bore SW. A 16 bore would probably bring @ 50% more in the same condition.
Best Regards, George
Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
Re: Looking for information/value on Sterlingworth
Thank you George.
I'm just getting started in this and find the history exciting. If I understand, my 16 Gauge is worth +/-50% more than the 12 gauge? Where or how may I determine the monetary value for this piece?
Kind Regards,
Sailor
I'm just getting started in this and find the history exciting. If I understand, my 16 Gauge is worth +/-50% more than the 12 gauge? Where or how may I determine the monetary value for this piece?
Kind Regards,
Sailor
Re: Looking for information/value on Sterlingworth
If you put it on gunbroker without a reserve the selling price will be it's value.
"I have more than I need, but not as many as I want"
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
Re: Looking for information/value on Sterlingworth
You can also look at the completed auctions and find a similar item.
"I have more than I need, but not as many as I want"
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
-
jolly bill
- Posts: 1517
- Joined: Sun Jan 21, 2007 10:06 pm
- Location: Western NY
- Has thanked: 1261 times
- Been thanked: 430 times
Re: Looking for information/value on Sterlingworth
As a market indicator, at the Rochester NY gun show a week ago, there was a 12 gauge Philadelphia Sterlingworth walking around that was at least as good looking as your S'worth. The guy was asking $650.00. Not sure if he sold it.
Jolly
Jolly
-
fullchoke16
- Posts: 426
- Joined: Fri Jan 05, 2007 11:17 pm
- Location: Western PA
- Been thanked: 1 time
Re: Looking for information/value on Sterlingworth
Just thinking about the current market, I believe that's a good observation. Entry level guns will take more of a hit in a poor economy. Nice CE and XE guns will always hold their price. On the 16 gauge, I'd agree with George at +/- 50%. You can pretty much double the price when you get to a 20 gauge. Fred
Recoil is most noticed when I miss
-
ASavageFox
- Posts: 552
- Joined: Thu Feb 05, 2009 8:23 pm
Re: Looking for information/value on Sterlingworth
Sailor,
With out seeing your gun, its really hard to say... I have seen SEVERAL 16 gauge sell for well under $1000 but also saw one sell for around $1800 despite having had a $1200 buy it now price when originally listed.
Condition is a huge factor on price... only the highest of condition SWs are valuable to collectors (or the few exceptionally rare versions), the rest are all shooters. Lots of other things effect value, barrel length, ejectors/etractors, stock dimensions, etc. $600-about $2200 is about the range for a 16 gauge from what I have seen. I could think of 16 SWs configurations and condition that could command well over $2200 but have never seen it.
Just my $.02
With out seeing your gun, its really hard to say... I have seen SEVERAL 16 gauge sell for well under $1000 but also saw one sell for around $1800 despite having had a $1200 buy it now price when originally listed.
Condition is a huge factor on price... only the highest of condition SWs are valuable to collectors (or the few exceptionally rare versions), the rest are all shooters. Lots of other things effect value, barrel length, ejectors/etractors, stock dimensions, etc. $600-about $2200 is about the range for a 16 gauge from what I have seen. I could think of 16 SWs configurations and condition that could command well over $2200 but have never seen it.
Just my $.02
Cheers!