Please note that registering for the Fox Collectors Forum does not
mean you are a member of the AH Fox Collectors Association. Paying members of
the AH Fox Collectors Association have access to a private forum where Fox guns
are bought and sold, Newsletters are archived, and many more interesting topics
about Fox guns are discussed by knowledgeable collectors. In addition AHFCA has
copies of all the available factory production cards for graded guns.
Members may obtain a copy of a card on an individual gun. Each member receives
one free card look up per year and then a $25.00 fee applies. To obtain
membership information please click on the Fox Image below.
To view a sample of
a factory card click on the card below
Fox Collectors
The Fox Collectors forum was founded in 2006 to stimulate interest in the history and production of Fox shotguns. We believe you will enjoy our forum and learn more about the rich history of Fox shotguns.
NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
I have an A grade 20ga that letters to 1916. I checked the chamber length with my chamber gauge they measure 2-3/4". Can I assume that they were lengthened at some point? The previous owner said they were never lengthened when he owned it, but of course he doesn't know what could have been done to it before then. Nothing on the card either. Doesn't really matter to me; just curious if it could have come from the factory that way?
Can I assume that they were lengthened at some point?
Short answer is yes.
If it came from the factory intended for 2 3/4-inch shells the chamber would be 2 5/8-inch. I have an AE-Grade 20-gauge from 1920 that was ordered for 2 3/4-inch shells and it has 2 5/8-inch chambers.
From the 1890s to the introduction of progressive burning smokeless powder, high velocity, 20-gauge loads in 1922, the heaviest 20-gauge loads offered in the "standard" 2 1/2-inch shell was 2 1/4 drams of bulk smokeless powder or 18-grains of dense smokeless powder (such as Infallible or Ballistite) pushing 7/8-ounce of shot.
HIGH GUN 20-gauge, 2 1-2 inch, #7 1-2Ch, Ballistite.jpg (95.25 KiB) Viewed 1412 times
In the 2 3/4-inch or longer 20-gauge shells, our North American ammunition companies offered a bit hotter load of 2 1/2 drams of bulk smokeless powder or 20-grains of dense smokeless powder (such as Infallible or Ballistite) pushing 7/8-ounce of shot --
