Please note that registering for the Fox Collectors Forum does not
mean you are a member of the AH Fox Collectors Association. Paying members of
the AH Fox Collectors Association have access to a private forum where Fox guns
are bought and sold, Newsletters are archived, and many more interesting topics
about Fox guns are discussed by knowledgeable collectors. In addition AHFCA has
copies of all the available factory production cards for graded guns.
Members may obtain a copy of a card on an individual gun. Each member receives
one free card look up per year and then a $25.00 fee applies. To obtain
membership information please click on the Fox Image below.
To view a sample of
a factory card click on the card below
Fox Collectors
The Fox Collectors forum was founded in 2006 to stimulate interest in the history and production of Fox shotguns. We believe you will enjoy our forum and learn more about the rich history of Fox shotguns.
NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
I joined the forum about three months ago. I purchased a 16 gauge side by side A.H. Fox shotgun from a friend. I have all the serial numbers and codes for the gun. I read about John T. Callahan, Arms Historian of Southampton, MA in this forum. I sent him a check for $45 to get a factory assessment on March 5, 2016. He has yet to respond to my request.
About my gun. The serial number is 301409. The grade stamp is "A" The barrel weight is "3". I'd like to get some idea of the history of this gun and it's possible value. I will try to post some pictures of the gun, but as I'm new to the forum, I have not yet figured that out.
Not much to tell but you have a nice 16ga Fox A grade. It appears as if the case colors were lightly polished as the action is bright.
The checkering on the forend appears as if may have been lightly sanded as the diamonds appear flatter than normal and are not consistent in color. But it is very hard to evaluate a gun from pictures. I would classify your gun as a solid shooter of much interest to the folks that hunt. But I would say your gun has little collector appeal due to it's average condition. Value can be determined by searching the various internet gun auction sites for like examples that actually sold. I would write John C a note about your letter as he normally gets letters out in 6-8weeks. Craig Larter
Glad you were able to get the pictures posted. Looks like a nice honest A Grade 16ga extractor gun. How long are the barrels, and do you have an idea of the choke constriction? As Craig said, value is hard to determine without the gun in hand, but you could get a good idea of what people are asking for them by checking out sites like Guns International, Guns America or Gunbroker. Keep in mind these are asking prices, not what people are actually getting for the gun in many cases. Value is all about condition and usually originality. I've seen a fair amount listed in the $3,00 to $4,000 range in good condition.
I love a 16ga, carries like a 20 and shoots like a 12!
Mike
"Games played with the ball, and others of that nature, are too violent for the body and stamp no character on the mind. Let your gun therefore be your constant companion of your walks." - Thomas Jefferson
Nice gun from what I can see. I'll add that the 6th pic makes it look like the lever is too far right. If that's the way it actually rests when the gun is snapped closed, someone probably did work on the bolting system. And if so, I'd suggest getting that redone so it's just a tad right of center. Also, maybe it's just the angle of the 3rd pic but the front forend screw seems to lack the factory crosshatching on the end of its shank. If so it was probably replaced.
A quick way to obtain info on your gun is to join the AHFCA and then request a copy of the factory card for your gun, which usually only includes the front of the factory card, but for some guns both sides of the card are available from the AHFCA.
Check out the AHFCA Home Page on how to join and the many benefits, which includes 1 free card check per year and access to Members Only forum where Fox guns are discussed in more detail and guns/parts are listed for sale:
IMG_2837 by Flyman1228, on Flickr
IMG_2831 by Flyman1228, on Flickr
IMG_2817 by Flyman1228, on Flickr
IMG_2816 by Flyman1228, on Flickr
IMG_2815 by Flyman1228, on Flickr
IMG_2812 by Flyman1228, on Flickr
IMG_2811 by Flyman1228, on Flickr
IMG_2807 by Flyman1228, on Flickr
IMG_2804 by Flyman1228, on Flickr
IMG_2788 by Flyman1228, on Flickr
