New to me early Fox C grade

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
Doug Mann
Posts: 43
Joined: Sat Aug 25, 2007 4:19 pm

New to me early Fox C grade

Post by Doug Mann »

Earlier this week a couple of friends of mine and I went to the Cabela's in Hammod, IN for some shooting supplies. We made our usual walk thru of the Gun Library and there, in one of the cases, was this gun marked AHF on the tag. I told one of my friends that it sure looked like a Fox so I took it out of the case and sure enough it was an early (#7647) C grade. It's not perfect, the action was hot blued for some reason or other however the engraving is excellent. The wood was given gloss finish including the checkering and it is missing a butt plate or recoil pad.

Now for the good part: This Fox has 2 sets of barrels. The set marked #1 is 30" and is choked .011R - .015L, the set marked #2 and serial numbered to the gun is 32" and choked .030R - .030L. The second set has its own forearm numbered to the gun. The barrels are nearly perfect with what I believe are original, nice, shiney .723 - .724 bores and 2 5/8" chambers. I was really pleased when I shouldered the gun and it fit me really well in spite of no butt plate or pad. I later measured the stock and found 1 3/8" DAC - 2 1/8" DAH - perfect for me. Apparently someone in 1908 - 09 liked high dimensions! 8)

The best part was the price! Someone at Cabela's did not have a clue as to the value.
Proud regular member of the ACGG
vaturkey
Posts: 3608
Joined: Wed Nov 26, 2008 6:33 pm
Location: Hamilton, VA
Has thanked: 1051 times
Been thanked: 1482 times

Re: New to me early Fox C grade

Post by vaturkey »

Some folks are just born lucky and then some folks like me aren't. Good find Doug for sure.
User avatar
Fin2Feather
Posts: 1111
Joined: Sun Jan 07, 2007 10:15 am
Location: Kansas High Plains
Has thanked: 329 times
Been thanked: 319 times

Re: New to me early Fox C grade

Post by Fin2Feather »

Pics, please :D !
Utica Fox Appreciation Society - Charter Member
AmarilloMike
Posts: 633
Joined: Fri Mar 14, 2008 6:23 pm
Location: Amarillo, Texas

Re: New to me early Fox C grade

Post by AmarilloMike »

Sure sounds like a nice and versatile combination to me.

Nice find!

Mike
Never trust a dog to guard your food.
Witty1
Posts: 108
Joined: Tue Feb 12, 2008 8:34 am
Location: Eastern PA

Re: New to me early Fox C grade

Post by Witty1 »

Great story, I bought my Fox Skeeter that way but not from Cabelas, with the Vent Rib they thought it was a Fox Model B, blued receiver all strange but true. The bluing will come off quite easy with remover. I alway wonder why people blue the receivers I wonder if they are trying to look like a Win model 21?
Witty1
George Lander
Posts: 412
Joined: Fri Oct 12, 2007 2:18 am
Location: Lexington, South Carolina
Contact:

Re: New to me early Fox C grade

Post by George Lander »

Doug: To quote an old movie title: "WHAT PRICE GLORY" (in other words, what did you steal that jewel for?) CONGRATULATIONS!

Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
DGKaas
Posts: 201
Joined: Sun Jan 28, 2007 7:28 pm
Location: Philadelphia

Re: New to me early Fox C grade

Post by DGKaas »

Nice Doug , I have an early 32"/28" CE set. Also, I sent you an email to your hotmail account on a Lindner project.

Maybe if you tell Mr. Lander how much you paid Cabelas for the C grade, he'll tell us how much he paid for all the guns on his website... :roll:
eightbore
Posts: 3307
Joined: Mon Jan 15, 2007 5:12 pm
Has thanked: 91 times
Been thanked: 441 times

Re: New to me early Fox C grade

Post by eightbore »

Nice to see that my friend Don is "up to speed".
Doug Mann
Posts: 43
Joined: Sat Aug 25, 2007 4:19 pm

Re: New to me early Fox C grade

Post by Doug Mann »

DGKaas wrote:Nice Doug , I have an early 32"/28" CE set. Also, I sent you an email to your hotmail account on a Lindner project.

Maybe if you tell Mr. Lander how much you paid Cabelas for the C grade, he'll tell us how much he paid for all the guns on his website... :roll:
Don, I almost spit up my coffee! :D I will say this: I will never get one at this price again. No one in their right mind would sell a Fox C for that price.

BTW, I did not receive you email about the Lindner so please try again @ customfox@hotmail.com

Doug
Proud regular member of the ACGG
DGKaas
Posts: 201
Joined: Sun Jan 28, 2007 7:28 pm
Location: Philadelphia

Re: New to me early Fox C grade

Post by DGKaas »

Doug- I just resent the email. (it has some attachments. Perhaps its being blocked?) I once bought an XE Phila Fox from The Big C for $2200 that was listed only as a "Fox Boxlock" (SST, 28" bbls, pistol grip and 2" D@H!)
George Lander
Posts: 412
Joined: Fri Oct 12, 2007 2:18 am
Location: Lexington, South Carolina
Contact:

Re: New to me early Fox C grade

Post by George Lander »

Hello Don: If you really want to know just let me know which one & I'll be more than happy to tell you what I paid for it. My point was, everyone likes to get a bargain especially from an outfit like Cabelas. Sounds like you made a great deal on the XE as did Doug on the CE. As long as nobody's taking advantage of somebody's widow I say," more power to them".

Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
Doug Mann
Posts: 43
Joined: Sat Aug 25, 2007 4:19 pm

Re: New to me early Fox C grade

Post by Doug Mann »

I thought I would post a couple of pictures of my newly aquired Fox for everyone to see. However, my main reason for posting them is to get eveyone's take on the safety. It appears to be a later Fox safety button and there is no "SAFE" marking on the tang. I'm wondering if this gun was originally made as a live bird gun wth no safety and one was added later. I would ask for a letter on the gun but I'm not sure if information is available for a 1909 Fox.

Any thoughs would be welcome!
Image

Image
Proud regular member of the ACGG
Researcher
Posts: 6256
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 487 times
Been thanked: 2500 times

Re: New to me early Fox C grade

Post by Researcher »

That is exactly what it looks like. The surviving cards begin at about serial number 9600.
Share the knowledge
Post Reply