Single Barrel Trap

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
MARSHFELLOW
Posts: 1730
Joined: Mon Jan 08, 2007 2:07 pm
Location: Adirondack Mountain foothills
Has thanked: 131 times
Been thanked: 193 times

Single Barrel Trap

Post by MARSHFELLOW »

What do we think the percentage of SBT guns is WITH a safety vs. WITHOUT a safety??? Frankly, I thought they were all safety-less but I just saw one with a safety onboard.

tjw
IN GOD WE TRUST. SPE Skeet & Uplands and AH Fox vent rib guns a specialty
User avatar
Silvers
Posts: 5188
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1232 times
Been thanked: 1880 times

Re: Single Barrel Trap

Post by Silvers »

Tom, I don't know the answer to your question on production percentage. But I will say that I've had three Fox SBT guns apart, all without safety buttons. All three had the milling cuts under the upper frame tang for the safety components = unnecessary work for a safety-less gun. That tells me that Fox could turn out a SBT gun with safety, on order with very little extra work. Silvers
Aan
eightbore
Posts: 3307
Joined: Mon Jan 15, 2007 5:12 pm
Has thanked: 91 times
Been thanked: 441 times

Re: Single Barrel Trap

Post by eightbore »

That is some piece of news. I have never noticed the filled safety cut. I'll have to get mine out and look. Tom, what's the story on the SBT with the safety? Is it for sale?
User avatar
Silvers
Posts: 5188
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1232 times
Been thanked: 1880 times

Re: Single Barrel Trap

Post by Silvers »

Bill, I may not have written that clearly enough. I wrote that the milling cuts are there under (not through) the upper frame tang. These are the radiused mill cuts that hold the safety in the fire and safe positions. The cut through the top frame tang for the actual safety button isn't there. Therefore there is not a plugged slot. However doing the slot would be an easy milling operation with a slitting cutter if someone ordered a Fox SBT with safety. As I wrote, the rest of the underneath milling is already done - at least it was on the three guns I had apart.

P.S. I did not see a hole for a safety pushrod, or other provision for pushing the safety backward when the gun is opened, therefore I am thinking that any Fox SBT ordered with a safety was probably supplied with an independent (non-auto) safety button. That of course makes sense for a trap gun. Silvers
MARSHFELLOW
Posts: 1730
Joined: Mon Jan 08, 2007 2:07 pm
Location: Adirondack Mountain foothills
Has thanked: 131 times
Been thanked: 193 times

Re: Single Barrel Trap

Post by MARSHFELLOW »

Pan Silvers, thanks for the info, neat. The one I just got out of the closet has no safety. It's an early J.

Murph, like I said, the one I was just lucky to find is, in fact, safety-less.....but it has a nice amt of original condition. I posted the card a few weeks ago...400082. Ive got to get some RST's and get it on the trap field. The one that I saw with a safety was/is offered by ...it was on their website, found it on Google last nite.

tjw
IN GOD WE TRUST. SPE Skeet & Uplands and AH Fox vent rib guns a specialty
Post Reply