Sterlingworth Disassembly

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
Dustman47
Posts: 7
Joined: Sat Sep 19, 2020 7:55 am

Sterlingworth Disassembly

Post by Dustman47 »

Other than the stock removable disassembly instructions on the homepage; does anyone direct me to instructions or videos that go beyond that to complete disassembly?
Top
User avatar
spyder
Posts: 436
Joined: Sat Aug 11, 2007 1:08 pm
Location: Middle Tennessee
Has thanked: 37 times
Been thanked: 68 times

Re: Sterlingworth Disassembly

Post by spyder »

I don't know of a video or tutorial that goes beyond getting the stock out by removing the hammer sears. Removing the hammers is easy, putting them back in is harder due to working against the tension of the hammer springs. Removing the spindle is also tricky as it requirers trimming the peening on the yoke. For me, any gunsmithing attempts stop at metal removal.
Top
Post Reply

Return to “"Technicana" and Restoration Forum”