Page 1 of 1
Fox Sterlingworth 12ga Model 1911
Posted: Sun Nov 06, 2016 3:35 am
by Kotharu.Khasis
Hi All,
first time poster here.
I recently acquired a Sterlingworth 12ga model 1911 SN 57048.
The shoulder stock is not original and the safety slider has been replaced along the way.
I learned alot from reading these forums, and now I'm posting back to thank all of you and to include some pictures:
Direct links below:
https://www.dropbox.com/s/bf1ckuh229jv7 ... 9.jpg?dl=0
https://www.dropbox.com/s/dvmc6vctz5nls ... 6.jpg?dl=0
https://www.dropbox.com/s/iw57b08y6mrak ... 0.jpg?dl=0
https://www.dropbox.com/s/ljp7lj21t598k ... 3.jpg?dl=0
https://www.dropbox.com/s/uenz09tsf86vx ... 3.jpg?dl=0
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Nov 06, 2016 8:51 am
by vaturkey
I'm thinking it wouldn't be difficult to get the proper Sterlingworth safety to replace the aftermarket one currently on the gun. Also if you are a bit handy and take your time you can buy a semi-fit buttstock and replace what's on there. For me, that stock has way too much drop to be usable. One can often find parts on ebay for the 12 gauge Sterly. PS. Instructions on how to take the gun apart on shown on the home page. Looks like barrels are in good shape and that's the most important part for sure.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Nov 06, 2016 9:58 am
by eightbore
The butt treatment may indicate that the gun was modified outside of the USA. Is this a possibility? I like it.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Nov 06, 2016 10:48 am
by Kotharu.Khasis
@vaturkey
In fact the right barrel is rather pitted.
I bought it as a cheap shotgun with the intention of sawing it off, barrel and stock. Now I have a bit more respect for that old a piece.
I'm not a fan of hunting, so I guess I'll refurbish the woodwork and leave the thing hanging on the wall.
Someone more knowledgeable than me might fancy restoring it to original.
@eightbore
In fact I live in Lebanon - Middle-East.
I have no idea how this gun ended up here, probably part of a batch of used imports.
No clue on the history of it either, but around here Fox shotguns are pretty much unknown.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Nov 06, 2016 11:41 am
by vaturkey
Interesting. Bet that gun could tell some interesting stories indeed.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Mon Nov 07, 2016 11:17 am
by Fin2Feather
Wow; is it just the photo angle or does that stock have a ton of DAH? Interesting butt plate too!
Re: Fox Sterlingworth 12ga Model 1911
Posted: Mon Nov 07, 2016 1:59 pm
by birdawg
12 inch. Barrels and a pistol grip for a stock would be a good use for that fox if it is legal in your location
Re: Fox Sterlingworth 12ga Model 1911
Posted: Mon Nov 07, 2016 2:54 pm
by OH Osthaus
not sure a 12" shotgun barrel is legal any where without special permits based on 1930's federal law
Re: Fox Sterlingworth 12ga Model 1911
Posted: Mon Nov 07, 2016 3:31 pm
by vaturkey
Poster is from the middle east. No idea what the rules are outside of the USA.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Tue Nov 08, 2016 9:25 am
by Kotharu.Khasis
The laws here are pretty lax for hunting guns.
Everything goes as long as the gun uses shot shells.
Anything "military" (handguns, rifles, machine guns etc..) is strictly controlled.
I will keep it as is though. @vaturkey said it best: that piece must have some stories to tell.
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Dec 18, 2016 6:35 am
by Kotharu.Khasis
Re: Fox Sterlingworth 12ga Model 1911
Posted: Sun Dec 18, 2016 8:18 pm
by eightbore
Nice gun.