Beyond stock removal.....

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
vince174
Posts: 14
Joined: Mon Feb 04, 2013 11:52 am

Beyond stock removal.....

Post by vince174 »

I've seen a lot of posts where people ask about complete disassembly of a Fox action. Most of the advice ends with the suggestion to take the gun to a competant gunsmith. Is there someone here who has completely disassembled a receiver ? I have a question about the hammer springs and how they are held in the receiver. Please PM me and I can explain a little bit more.

Thanks

Vince
Top
Twice Barrel

Re: Beyond stock removal.....

Post by Twice Barrel »

Good question. If you don't get a satisfactory response here post your question on Doublegun.com
Top
vince174
Posts: 14
Joined: Mon Feb 04, 2013 11:52 am

Re: Beyond stock removal.....

Post by vince174 »

Although no one responded, I figured things out. I thought the rod coming off the hammers went through what I now know is a mainspring cup. Interesting hammer configuration. Much of the rest of the internals look like a Ithaca NID.

Thanks

Vince
Top
Post Reply

Return to “"Technicana" and Restoration Forum”