Ansley H Fox safety operation

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
geronimo.tn
Posts: 4
Joined: Thu Aug 22, 2019 3:03 pm

Ansley H Fox safety operation

Post by geronimo.tn »

I pasted this in the general forum,, before I found this

I just took possession of my first Fox,, Ansley H Fox made 1910 12 ga.
The gun has been entirely refinished and looks like has never been fired since being restored and became a safe queen.
Was stiff and difficult to open at first
On these guns,, is the safety in the ''fire'' position when pushed forward or pulled to the rear.
At first I could not get the hammers to fall (on safety caps) at all,, but opening/closing and working the safeties has loosened it up.
With the safety forward.. the right barrel hammer can fire
with the safety to the rear.. both triggers/hammers can fire
????
geronimo.tn

Posts: 2
Joined: Thu Aug 22, 2019 2:03 pm
User avatar
Jeff S
Posts: 3045
Joined: Tue Jan 06, 2015 10:59 am
Location: Grand Rapids, Michigan
Has thanked: 1648 times
Been thanked: 1181 times

Re: Ansley H Fox safety operation

Post by Jeff S »

Yikes!!!!!
Post Reply