Custom Fox photos

eightbore · Post by **eightbore** » Thu Sep 18, 2008 6:16 pm

Ken, are you far enough along to post a progress picture of Dewey's gun? When you have time, and Dewey gets some file time to spare, you will have one of mine in the hopper. It is past phase 1. For those interested, phase 1 is a confirmed plan, in writing, with copies, and disassembly. Bill Murphy

Ken Hurst · Post by **Ken Hurst** » Thu Sep 18, 2008 6:31 pm

Mr. Bill --- Dewey already has it back at the shop. Sorry but didn't get any pictures, however, Dewey said he'd take a few. Looking forward to scratching a few lines for you. ken

deweyvicknair · Post by **deweyvicknair** » Fri Sep 19, 2008 11:57 am

Here are some photos of the progress thus far with many thanks Mr. Ken Hurst.

eightbore · Post by **eightbore** » Fri Sep 19, 2008 12:40 pm

That will be a very elegant finished gun. Next step, the oven? Murphy

mike campbell · Post by **mike campbell** » Fri Sep 19, 2008 2:19 pm

Beautiful work, Gentlemen!

Dewey, as Bill asked, are you ready for coloring or
do you have further plans for the rib?

eightbore · Post by **eightbore** » Fri Sep 19, 2008 2:48 pm

Yeah, Dewey, how did you make the pigeon rib. Did you file the original rib or add to the top? It doesn't seem like there is enough metal on the concave rib to do what you apparently have done.

eightbore · Post by **eightbore** » Wed Nov 05, 2008 8:49 pm

Dewey has told me that the rib has no additional metal added and that he merely filed the concave rib flat. The contouring of the "Becker Shelf" makes the rib look higher than it actually is. I have asked Dewey to create a "pigeon rib" on my project gun. I have seen the gun but I still have a hard time believing that there is enough height in the rib to file it flat. I'll have to look at it again, I guess.

deweyvicknair · Post by **deweyvicknair** » Fri Nov 21, 2008 1:58 am

Hey everyone, just a photo of the finished gun.

eightbore · Post by **eightbore** » Fri Nov 21, 2008 7:36 am

Dewey congratulations on the great project. Tell us about the finish on the metal.

deweyvicknair · Post by **deweyvicknair** » Fri Nov 21, 2008 7:47 am

Thanks Bill, the finishes are as follows:
bbls- rust blue, pins- nitre blue, triggers and cocking indicators -gold plated, frame -French grey(which in this instance is case hardening with the colors removed)

Now I'm going to finish my breakfast and get back to chiseling on a certain boardmember's A grade frame.

Fox Collectors

Custom Fox photos

A bit closer to finished

Finished !