experts on Kautsky triggers

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
jim garrett
Posts: 37
Joined: Sat Mar 15, 2008 6:01 pm
Location: Birmingham, Alabama

experts on Kautsky triggers

Post by jim garrett »

I purchased a 16 gauge Fox with a Kautsky trigger and the right barrel refuses to fire. It has been restocked and I have not taken it apart to see if there is binding by the stock on the trigger or the hammer. I need to find consensus on the best 'smith on Kautsky triggers if I can't find the problem on my own.
Top
Twice Barrel

Re: experts on Kautsky triggers

Post by Twice Barrel »

I had the same problem on my 16 gauge AE after a stock repair. Before you send it off to a gunsmith check the rear tang screw it may need to be tightened. Kautsky triggers can be temperamental but once they are adjusted properly they are pretty reliable.
Top
Researcher
Posts: 5733
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 291 times
Been thanked: 1515 times

Re: experts on Kautsky triggers

Post by Researcher »

I'm sure their may be others, but Larry has even built new Fox-Kautzky triggers --

http://dutchmanwoodworks.com/
Share the knowledge
Top
Post Reply

Return to “"Technicana" and Restoration Forum”