Sterlingworth Waterfowl
-
bbman3
- Posts: 1659
- Joined: Fri Jan 05, 2007 10:13 pm
- Location: Deep South
- Has thanked: 240 times
- Been thanked: 136 times
- Contact:
Re: Sterlingworth Waterfowl
I once had a 95 percent wildfowl,but consider an HE a much better gun. Bobby
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Sterlingworth Waterfowl
I know not where the one from Albrights went. Mine weighs a half ounce over nine pounds. There are no stampings that identify them a Fox-Sterlingworth Wildfowls as far as I know.
Share the knowledge
Re: Sterlingworth Waterfowl
Dave, which pad is on that sweetheart gun of yours?
"I have more than I need, but not as many as I want"
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
"The search continues on many fronts"
Life Member, A.H. Fox Collectors Association.
-
TOOL MAN
- Posts: 1384
- Joined: Mon Jan 08, 2007 1:05 pm
- Location: The NUTMEG State
- Has thanked: 30 times
- Been thanked: 175 times
Re: Sterlingworth Waterfowl
Dave,
That's why we never play poker with you!! Where's the tiara on that 'closet queen??' What Jimmy Malone would call a real "humper!!"------Roll
That's why we never play poker with you!! Where's the tiara on that 'closet queen??' What Jimmy Malone would call a real "humper!!"------Roll
On the whole....I'd rather be in Philadelphia....
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Sterlingworth Waterfowl
Pad!! It aint got no stinkin' pad!!
Does have twin ivory sights though.
Likewise my Ithaca NID No. 2 Super-Ten don't got no pad. Guns ordered by real men!! Not necessarily yours truely!!
Share the knowledge
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Sterlingworth Waterfowl
Not that I've measured. The bores of mine are .728" in both tubes, with .039" choke in both tubes. The only Savage-era Super-Fox I've measured that I recall was one Lou had at the old CSMC plant and its bores were .731".
Share the knowledge
-
loggy
- Posts: 1116
- Joined: Sat Apr 14, 2007 1:33 pm
- Location: idaho
- Has thanked: 412 times
- Been thanked: 248 times
Re: Sterlingworth Waterfowl
My Savage Super Fox bores measure .7385. The barrels are choked 48/49. The gun was shipped on 10/25/31. It is my understanding that Burt Becker was still associated with the company. I have no documentation that he worked on my gun. Perhaps all of the Wildfowls made had standard bores? They seems to be fewer Wildfowls than twenty gauge Supers. Dave's is certainly one of the best. Thanks for the information.
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Sterlingworth Waterfowl
Here are pictures another really clean Fox-Sterlingworth Wildfowl sent me by one of our members and a new low serial number --












Share the knowledge
-
MARSHFELLOW
- Posts: 1730
- Joined: Mon Jan 08, 2007 2:07 pm
- Location: Adirondack Mountain foothills
- Has thanked: 131 times
- Been thanked: 193 times
Re: Sterlingworth Waterfowl
.......good thread....... thanx.
tjw
tjw
IN GOD WE TRUST. SPE Skeet & Uplands and AH Fox vent rib guns a specialty
- Silvers
- Posts: 5188
- Joined: Sat Jan 06, 2007 9:28 pm
- Location: Between Phila and Utica
- Has thanked: 1232 times
- Been thanked: 1880 times
Re: Sterlingworth Waterfowl
In follow-up to John's post ..... we have a limited "sample size" with the SW Wildfowls but I believe that Savage supplied these heavy Special Alloy 0-frame barrels with nominal .729" bore/typical choking on SW Wildfowls, and also with ~.738" overbore and significantly heavier choking for Super-Foxes. I know of a 1923 Super-Fox that has a #2 marked 32-inch barrel fitted by Savage. Apparently the gent wanted a somewhat lighter barrel, similar story to the two barrel Alaskan HE I wrote about separately. The Savage barrel is stamped Special Alloy, is numbered to the frame, has the Savage/oval proof mark, and has HE style engraving at the back ends of the breeches (unlike the SW Wildfowls). Bores are .738/.739" and choking is 47 and 48 points. Weight 4-11. Sorry I don't have a pic and the gun isn't here to take any ..... just working from my tech notes. Silversloggy wrote:My Savage Super Fox bores measure .7385. The barrels are choked 48/49. The gun was shipped on 10/25/31. It is my understanding that Burt Becker was still associated with the company. I have no documentation that he worked on my gun. Perhaps all of the Wildfowls made had standard bores? They seems to be fewer Wildfowls than twenty gauge Supers. Dave's is certainly one of the best. Thanks for the information.
Re: Sterlingworth Waterfowl
Really nice looking guns!! I'd love to find a 12ga Sterly ejector to waterfowl with!!
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Sterlingworth Waterfowl
I was going through some of my Fox paper getting ready for the VC and I found a lttle handwritten note from Roe Clark in which he stated he believed there were about 35 Fox-Sterlingworth Wildfowls produced. That would track with what I've observed and recorded -- thirty in the 1341xx batch and five in the 3528x batch.
Share the knowledge