I have a Fox Sterlingworth 12 gauge 30" double that my dad bought in the late 1930s (I don't know whether he bought it new or used). My granddad took it when dad went into the service and it passed back to me when my granddad died in 1962. Neither dad nor granddad liked hunting much so I don't think it was heavily used. It hasn't been fired since I went away to college 47 years ago, but I take it to a gun shop every ten years for a cleaning, oiling and general check-up. They always say it's in good shape (aside from nicks and dings on the wood). The last one told me it would be quite valuable if it had been made a year earlier, if that info helps.
The serial number on the trigger guard is 139602. The right barrel is stamped with "Sterlingworth Fluid Compressed Steel" and the left barrel with "Savage Arms, Corp. Utica NY. USA." Anything any of you can tell me about this gun would be appreciated.
Another new guy with questions
-
Researcher
- Posts: 6256
- Joined: Sun Jan 07, 2007 7:18 pm
- Location: WA/AK
- Has thanked: 487 times
- Been thanked: 2500 times
Re: Another new guy with questions
Welcome. A 12-gauge, 30-inch barrel Sterlingworth is probably the most popular shotgun Fox made, so there are a lot of them out there. Traditionally the Fox shotguns built in Philadelphia were a bit more highly thought of than those made after Savage bought out the A.H. Fox Gun Co. and moved the manufacture of the guns to their factory in Utica, New York, in late 1929. Today, more thoughtful collectors and shooters evaluate each gun on its own merits.
Here is my canned history of the Sterlingworth reply --
Sterlingworth -- When Ansley H. Fox, was forced to add a lower priced gun to his line of graded Ansley H. Fox guns, in 1910, he didn't want to detract from the A.H. Fox Gun Co. name, so they dummied up "The Sterlingworth Company." The first year’s guns, beginning with serial number 50,000, were marked as being "Made By The Sterlingworth Company, Philadelphia, U.S.A." Actually the first few hundred were marked "Wayne Junction" instead of Philadelphia. They even produced a separate The Sterlingworth Gun Co. catalogue for 1910. These guns were built under the same patents as the graded Ansley H. Fox guns. The main moneysaving features were an American Black Walnut (Juglans nigra) stock as opposed to the more costly European thin shell walnut (Juglans regia) stocks on the graded guns, and the "Sterlingworth Fluid Steel" barrels instead of Krupp Fluid Steel barrels. Workmanship on these early Sterlingworths was generally excellent, better than graded guns from the 1920's and 30's. The early "The Sterlingworth Company" guns had a rounded front for the side panel of the frames. According to my list of observed specimens that was changed to the same pointed profile as the graded guns by #51,301.
In 1911 this field grade gun was added to the A.H. Fox Gun Co. catalogue as the Model 1911. "Model 1911" is stamped in the forearm iron. (A very few graded guns made about this time are stamped Model 1910) The lowest Model 1911 serial number I've recorded is #53,140. All of these early Sterlingworths had a recessed hinge-pin head like Parkers, or Ansley's earlier guns made in Baltimore and the Philadelphia Arms Company A.H. Fox gun. The highest "pin gun" Sterlingworth serial number I've recorded is # 62,244. After that Sterlingworth hinge-pins are dressed smooth like the graded guns. When the small-bores (16- and 20-gauge) were added to the Ansley H. Fox line they were briefly referred to in some flyers as the Model 1912, but I've never seen one so stamped. Graded 20-gauge guns have serial numbers beginning with 200,000 and 20-gauge Sterlingworths 250,000. Graded 16-gauge guns have serial numbers beginning with 300,000 and 16-gauge Sterlingworths 350,000.
Most of the Philadelphia produced S-worths had the word "Sterlingworth" roll stamped on each side of the frame. After production moved to Utica, Savage started using a "Fox-Sterlingworth" roll stamp.
When the Sterlingworth came out in 1910 it had a price of $25. That climbed to $55 by 1919. A.H. Fox Gun Co. reduced the price to $48 in 1922 and again to $36.50 in 1926. Workmanship of course declined. Savage kept the $36.50 price until June 1932 when they upped it to $39.50. On February 10, 1936, they upped the price again to $42.85 (the digits 2 and 8 are transposed in McIntosh's book). On February 1, 1938, Savage tried a price cut and dropped it to $35. February 1, 1939, they upped the price to $44.75. January 2, 1940, up again to $48.50. January 2, 1941, up to $52.65 and June 16 up again to $56.50. January 2, 1942, up again to $64.95.
For $40 Graded or $30 Sterlingworth (last prices I've seen quoted) you can get a factory letter on most any Ansley H. Fox shotgun (Philadelphia or Utica) from Mr. John T. Callahan, 53 Old Quarry Road, Westfield, MA 01085. The information exists on the factory work-order cards, probably 85+% of which still exist. Send him the complete serial number and a check, and he can do the rest. That would tell you the specifications of the gun when it left the factory.
Here is my canned history of the Sterlingworth reply --
Sterlingworth -- When Ansley H. Fox, was forced to add a lower priced gun to his line of graded Ansley H. Fox guns, in 1910, he didn't want to detract from the A.H. Fox Gun Co. name, so they dummied up "The Sterlingworth Company." The first year’s guns, beginning with serial number 50,000, were marked as being "Made By The Sterlingworth Company, Philadelphia, U.S.A." Actually the first few hundred were marked "Wayne Junction" instead of Philadelphia. They even produced a separate The Sterlingworth Gun Co. catalogue for 1910. These guns were built under the same patents as the graded Ansley H. Fox guns. The main moneysaving features were an American Black Walnut (Juglans nigra) stock as opposed to the more costly European thin shell walnut (Juglans regia) stocks on the graded guns, and the "Sterlingworth Fluid Steel" barrels instead of Krupp Fluid Steel barrels. Workmanship on these early Sterlingworths was generally excellent, better than graded guns from the 1920's and 30's. The early "The Sterlingworth Company" guns had a rounded front for the side panel of the frames. According to my list of observed specimens that was changed to the same pointed profile as the graded guns by #51,301.
In 1911 this field grade gun was added to the A.H. Fox Gun Co. catalogue as the Model 1911. "Model 1911" is stamped in the forearm iron. (A very few graded guns made about this time are stamped Model 1910) The lowest Model 1911 serial number I've recorded is #53,140. All of these early Sterlingworths had a recessed hinge-pin head like Parkers, or Ansley's earlier guns made in Baltimore and the Philadelphia Arms Company A.H. Fox gun. The highest "pin gun" Sterlingworth serial number I've recorded is # 62,244. After that Sterlingworth hinge-pins are dressed smooth like the graded guns. When the small-bores (16- and 20-gauge) were added to the Ansley H. Fox line they were briefly referred to in some flyers as the Model 1912, but I've never seen one so stamped. Graded 20-gauge guns have serial numbers beginning with 200,000 and 20-gauge Sterlingworths 250,000. Graded 16-gauge guns have serial numbers beginning with 300,000 and 16-gauge Sterlingworths 350,000.
Most of the Philadelphia produced S-worths had the word "Sterlingworth" roll stamped on each side of the frame. After production moved to Utica, Savage started using a "Fox-Sterlingworth" roll stamp.
When the Sterlingworth came out in 1910 it had a price of $25. That climbed to $55 by 1919. A.H. Fox Gun Co. reduced the price to $48 in 1922 and again to $36.50 in 1926. Workmanship of course declined. Savage kept the $36.50 price until June 1932 when they upped it to $39.50. On February 10, 1936, they upped the price again to $42.85 (the digits 2 and 8 are transposed in McIntosh's book). On February 1, 1938, Savage tried a price cut and dropped it to $35. February 1, 1939, they upped the price to $44.75. January 2, 1940, up again to $48.50. January 2, 1941, up to $52.65 and June 16 up again to $56.50. January 2, 1942, up again to $64.95.
For $40 Graded or $30 Sterlingworth (last prices I've seen quoted) you can get a factory letter on most any Ansley H. Fox shotgun (Philadelphia or Utica) from Mr. John T. Callahan, 53 Old Quarry Road, Westfield, MA 01085. The information exists on the factory work-order cards, probably 85+% of which still exist. Send him the complete serial number and a check, and he can do the rest. That would tell you the specifications of the gun when it left the factory.
Share the knowledge
-
Traditionalist
- Posts: 2
- Joined: Mon Dec 26, 2011 9:54 pm