How about these cool Super Foxes!

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
User avatar
fox-admin
Site Admin
Posts: 4165
Joined: Fri Jan 05, 2007 4:46 pm
Has thanked: 780 times
Been thanked: 2175 times

How about these cool Super Foxes!

Post by fox-admin »

From Factory Cards:
28388, HE, 32", 1 3/8" comb, 1 3/4" heel, 14 3/4"LOP, 9lbs 13oz, F/F, Straight Stock, anti-flinch pad, "leave round comb so can be dressed down" single trigger rear pos, independent safety, Consignee RAH Wood

28392, HE, 30", 1 5/8" comb, 1 5/8" heel, 14" LOP, 8lbs 12oz, F/F, Straight Stock, Silvers Pad, Beavertail Forend, single trigger rear position, no safety, pull 4lbs, bored to shoot 7 & 7 1/2 chilled shot consignee Lawrence Pancoast?

28394, HE, 30", 1 7/8" comb, 3 1/2" heel, 14 1/2" LOP, 9lbs 8oz, 70%/80%, Pistol Grip Stock, D stock and forend, C engraving, 3/8" cast off, silvers pad, pad to comb 10", ivory sights, fine checkering on top lever not coarse

29916, HE, 32", 1 1/2" comb, 1 1/2" heel, 15" LOP, Full Choke , Full Pistol Monte Carlo, chamber for 2 3/4" shell, lyman sights, rubber recoil pad
abner
Posts: 266
Joined: Sat Jan 06, 2007 7:55 pm
Location: Southern California
Has thanked: 46 times
Been thanked: 29 times

Post by abner »

Craig:

Where did you find the factory card information?
Ralph
loggy
Posts: 1116
Joined: Sat Apr 14, 2007 1:33 pm
Location: idaho
Has thanked: 412 times
Been thanked: 248 times

Post by loggy »

When you look at the serial numbers you wonder if the first three all went to the same duck club. Perhaps it was three guys having a few drinks that all decided to order the perfect gun. It would have been fun to have been there.
Researcher
Posts: 6256
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 487 times
Been thanked: 2500 times

Post by Researcher »

That 28392 bored for #7 and #7 1/2 shot with no safety, a beavertail forearm and a straight comb sounds like Lawrence Pancoast wanted a hefty pigeon or trap gun.

Eightbore, got any records of old Lawrence's shooting?
Share the knowledge
eightbore
Posts: 3307
Joined: Mon Jan 15, 2007 5:12 pm
Has thanked: 91 times
Been thanked: 441 times

Post by eightbore »

Researcher, it's a lot easier when we know the state where the person was located, but I'll give it a try. I have spent enough time in the Fox cards to know how lacking in information they are. By the way, I'm still working on my end of the "project" but it isn't getting anywhere fast. I'll keep trying.
User avatar
scaupman
Posts: 421
Joined: Fri Jan 23, 2009 6:58 pm
Location: Minnesota, Mississippi & Louisiana
Has thanked: 93 times
Been thanked: 162 times

HE 28392

Post by scaupman »

I searched for HE 28392 on the AHFCA web site and found this old thread.

Steve Barnett Fine Guns has her for sale now on his website.

(Note that adding a web link to a gun for sale is not allowed on this forum, but you can Google Mr. Barnett's name and find his web site easily.)

You will note that HE 28392 currently is in much different configuration than that listed on the factory card.

Looking at the factory card info, WOW, what a heavy HE for a 30" barrel gun and what great modern shooting dimensions, with the high super flat straight stock, rare Philly beavertail, and single trigger.

Yes, Mr. Pancoast must have been an avid trap and/or live bird shooter.

Sure wish I could have found her in original configuration!
eightbore
Posts: 3307
Joined: Mon Jan 15, 2007 5:12 pm
Has thanked: 91 times
Been thanked: 441 times

Re: How about these cool Super Foxes!

Post by eightbore »

If you google Lawrence Pancoast, you get the idea he may be the guy of that name who lived in Missouri, Ohio, or Maryland. In 1923, 1926, 1930, and 1938, no one by that name shot ATA birds in those states. He either lived somewhere else or did not shoot ATA. Still, it's a heck of a gun.
George Lander
Posts: 412
Joined: Fri Oct 12, 2007 2:18 am
Location: Lexington, South Carolina
Contact:

Re: How about these cool Super Foxes!

Post by George Lander »

Craig: I own SN 29903, HE 32inch F&F

Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
User avatar
scaupman
Posts: 421
Joined: Fri Jan 23, 2009 6:58 pm
Location: Minnesota, Mississippi & Louisiana
Has thanked: 93 times
Been thanked: 162 times

Re: How about these cool Super Foxes!

Post by scaupman »

George,

Does HE 29903 have an original Philly beavertail FE?

If so, could you post a photo of the FE wood and checkering and the underside FE iron for reference purposes - thanks.
George Lander
Posts: 412
Joined: Fri Oct 12, 2007 2:18 am
Location: Lexington, South Carolina
Contact:

Re: How about these cool Super Foxes!

Post by George Lander »

scaupman: It does have a BTFE. I don't know if it's original or not. I will post pictures ASAP.

Best Regards, George
"Therefore, never send to know for whom the bell tolls. It tolls for thee"......John Donne
Post Reply