New to me A grade and questions

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
ASavageFox
Posts: 552
Joined: Thu Feb 05, 2009 8:23 pm

New to me A grade and questions

Post by ASavageFox »

So i just bought an 12A (old engraving) and have a few questions... the gun has been messed with a fair amount... and I am okay with that... I did not pay much and it will still be fun to shoot. There is some extra engraving on the bottom of the gun that is really quite nice with the exception of the name "Bud Kling" crudely engraved in. The real interesting piece for me though is the forearm. I was under the impression that all graded guns had the deeley style latch unless special ordered with other... this gun as the sterlingworth style latch... comparing the attach point on the barrel to that of my C shows a different shape to the hook and the forearms are not interchangable even with the barrels off the receiver.

So the question is: Was my gun modified by welding on a different hook? It does not appear to have been messed with to me.. unless the original deeley hook could have been filed to accept the sterlingworth style forearm?? that would make this a fairly permanent change then hun? The barrels and receiver have matching serial numbers and I was originally thrown by the forearm b/c it is struck with the serial number and the letter A as well but then I realized it was a different style stamping. Also an interesting inlay "badge" on the forearm

The other question is: is the checkering on the butt stock correct... it seems a fancier design than my C and honestly the wood has even nicer character.

I am really not upset about the gun at all... the case is not my favorite color but other wise its a nice enough gun and the wide forearm is a lot more comfortable than the sliver of a forearm on my C. The craftmanship of the forearm is all very well down, the fit and finish is factory quality

Pics:
Image
Image
Image
Image
Image
Image
Image
Image

Thanks for any helpful information...obviously no letter on this but I got the card info and it does not way anything special about the forearm.
Cheers!
Researcher
Posts: 6256
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 487 times
Been thanked: 2500 times

Re: New to me A grade and questions

Post by Researcher »

It appears to me that the forearm is of totally after-market manufacture. That spring-loaded plunger works in the opposite direction of the plunger in a Fox & Kremer snap-on/off forearm. Appears that the latch was designed to work on an only slightly modified Deeley-style forearm loop. With the plunger working in that direction it would tend to pull the forearm away from the hinge instead of keeping it tight to the hinge as the factory snap-on/off forearms. Soneone put a lot of work into that forearm.
Share the knowledge
Post Reply