Page 1 of 1
Fore end iron question
Posted: Sat Aug 13, 2016 8:45 am
by CableguyJJS3
Ok so I know this isn't Fox, or like no Fox I've ever seen. And I found it in a box marked NID parts, and everything else in the box is NID, I don't think this is though. Anyone have any ideas what this might be off of? Never seen an iron like this before.
Re: Fore end iron question
Posted: Sat Aug 13, 2016 12:14 pm
by Researcher
Pretty sure that is a Flues SBT forearm iron.
Re: Fore end iron question
Posted: Sat Aug 13, 2016 2:34 pm
by CableguyJJS3
Ok I'll buy that, numbers fit in that frame for sure. And I cleaned it up some, now I can see the engraving and a 7, so would that make this a grade 7 iron?
Re: Fore end iron question
Posted: Sat Aug 13, 2016 2:50 pm
by Researcher
Probably. You might want to try posting in the Ithaca section on Shotgunworld.com and see if Walter Snyder has any info on that serial number --
http://www.shotgunworld.com/bbs/viewfor ... add198efe3
Re: Fore end iron question
Posted: Sat Aug 13, 2016 4:54 pm
by CableguyJJS3
Will do, thanks for the tip, I've never seen that forum before. Thanks!!! Jim
Re: Fore end iron question
Posted: Sat Aug 13, 2016 7:54 pm
by Brian Dudley
Yup.
Grade 7 ithaca SBT. Could be a knick model.
Re: Fore end iron question
Posted: Sun Aug 14, 2016 12:05 am
by Researcher
Could be a knick model.
Not with that 306853 serial number. Knicks began at 400000.