Sterlingworth Disassembly

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services

Sterlingworth Disassembly

Postby Dustman47 » Sat Sep 19, 2020 9:47 am

Other than the stock removable disassembly instructions on the homepage; does anyone direct me to instructions or videos that go beyond that to complete disassembly?
Posts: 7
Joined: Sat Sep 19, 2020 7:55 am

Re: Sterlingworth Disassembly

Postby spyder » Tue Sep 22, 2020 1:59 pm

I don't know of a video or tutorial that goes beyond getting the stock out by removing the hammer sears. Removing the hammers is easy, putting them back in is harder due to working against the tension of the hammer springs. Removing the spindle is also tricky as it requirers trimming the peening on the yoke. For me, any gunsmithing attempts stop at metal removal.
User avatar
Posts: 364
Joined: Sat Aug 11, 2007 1:08 pm
Location: Middle Tennessee

Return to "Technicana" and Restoration Forum

Who is online

Users browsing this forum: No registered users and 3 guests