Extractor barrels on ejector gun

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services

Extractor barrels on ejector gun

Postby james-l » Thu Apr 02, 2020 1:54 pm

I have a set of A grade extractor barrels I would like to use on a BE ejector gun, would it damage the ejector trips on the ejector gun?
james-l
 
Posts: 38
Joined: Fri Jan 05, 2007 9:30 pm
Location: Kalifornia

Re: Extractor barrels on ejector gun

Postby Brian Dudley » Mon Apr 06, 2020 10:02 am

It can be done. But... you will need to remove the ejector parts from the forend. You should be just fine to leave the trips in the frame.

OR... you can use an extractor forend with your extractor barrels, in which case the trips will have to be removed from the frame.

OR....... you can modify that extractor forend to clear the trips. In which case you will be able to use the gun as both an ejector and extractor guns depending on which barrels/forend you have installed.
,Brian Dudley
Brian Dudley
 
Posts: 195
Joined: Fri Aug 17, 2012 3:09 pm
Location: Rochester, NY

Re: Extractor barrels on ejector gun

Postby james-l » Mon Apr 06, 2020 12:35 pm

Thanks Brian, I was hoping the the trips would just slip on the follower but its best to be safe than sorry.
james-l
 
Posts: 38
Joined: Fri Jan 05, 2007 9:30 pm
Location: Kalifornia


Return to "Technicana" and Restoration Forum

Who is online

Users browsing this forum: No registered users and 1 guest