Need Yoke for 12 Ga Graded Fox

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
gilrussell
Posts: 18
Joined: Tue Nov 20, 2007 12:25 pm
Location: Southern AZ

Need Yoke for 12 Ga Graded Fox

Post by gilrussell »

I need a yoke for a graded 12 ga. I was starting to put one back together after inletting a new stock and saw that the existing one was cracked; it shattered as it came out. any ideas would be appreciated
Too much of a good thing is....wonderful. M. West
Top
mark beasland
Posts: 57
Joined: Wed Nov 21, 2007 6:22 pm
Location: Wisconsin
Been thanked: 1 time
Contact:
Contact mark beasland

Re: Need Yoke for 12 Ga Graded Fox

Post by mark beasland »

Hi, Gil Get a hold of Jason at https://www.ahfoxparts.com

Mark
Top
ViperR
Posts: 40
Joined: Sun Dec 18, 2011 10:18 am

Re: Need Yoke for 12 Ga Graded Fox

Post by ViperR »

Not to be ignorant, but what is the yoke look like? Is there another name for it? I have my Sterlingworth apart and want to examine mine. Thanks!
Top
ViperR
Posts: 40
Joined: Sun Dec 18, 2011 10:18 am

Re: Need Yoke for 12 Ga Graded Fox

Post by ViperR »

http://www.foxcollectors.com/My%20Forum ... lit=gunner

Found this thread that shows me what the yoke is and how it could shatter. Since my action is apart up to the sears & stock removal, I'll nose around and inspect the yoke & screw.
Top
Post Reply

Return to “"Technicana" and Restoration Forum”