Page 1 of 1
Position of midbead on 26" Sterlingworth brush barrels
Posted: Thu Feb 05, 2015 4:01 pm
by WPGRIFFON
Gentlemen
What would be the appropriate rib location (measurement) from breech for a mid bead on a 26" Sterlingworth 16 gauge brush barrels?
WPGRIFFON
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Thu Feb 05, 2015 4:44 pm
by fullchoke16
Judging from the location on my 30" Sterlingworth with factory beads, I'd say 14" behind the front bead on 26" barrels.
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Thu Feb 05, 2015 6:23 pm
by CableguyJJS3
My 16ga 28" measures the mid bead 13.5" behind the front bead. My 26" 16ga only has a front bead, sorry.
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Fri Feb 06, 2015 9:10 am
by vaturkey
12 3/4" between the front and back bead on a 26" Sterlingworth Deluxe 20 Gauge with ejectors if that helps. Both beads Ivory.
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Fri Feb 06, 2015 2:21 pm
by Researcher
I have two 26-inch barrel Fox skeet guns and the mid-bead is 12 1/2 inches back of the front bead on both.
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Fri Feb 06, 2015 3:15 pm
by WPGRIFFON
Thank for the help fellows.
Chris
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Fri Feb 06, 2015 5:42 pm
by fullchoke16
Chris, where in western PA are you located?
Re: Position of midbead on 26" Sterlingworth brush barrels
Posted: Sat Feb 07, 2015 12:23 am
by WPGRIFFON
FullChoke
New Castle, PA area
WPGRIFFON