Fox Graded Stock Dimensions

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
gilrussell
Posts: 18
Joined: Tue Nov 20, 2007 12:25 pm
Location: Southern AZ

Fox Graded Stock Dimensions

Post by gilrussell »

Were the graded Foxes typically turned out with dimensions similar to those of the Sterlingworths of the time, ie lots of drop? Or were they truly custom made?This relates to a Fox C Grade (12)that is coming this way next week without a stock. My dilemma is: look for a replacement or restock? I have a hard time with stocks with more than 1 3/8" to 1 1/2" at the comb so I am possibly answering my own question.

Any suggestions w be most appreciated. Gil
Too much of a good thing is....wonderful. M. West
Top
bbman3
Posts: 1607
Joined: Fri Jan 05, 2007 10:13 pm
Location: Deep South
Has thanked: 138 times
Been thanked: 101 times
Contact:
Contact bbman3

Re: Fox Graded Stock Dimensions

Post by bbman3 »

Gil graded dimensions were all over the board.I had an XE 20 that was 3 1/4 drop at heel and another one that was 2 3/8 inches.I doubt you will ever find a used stock that will fit correctly,at least I never have. Bobby
Top
Post Reply

Return to “"Technicana" and Restoration Forum”