Page 1 of 1
Back trigger not cocking
Posted: Sat Sep 20, 2014 12:06 pm
by Mills
I just acquired a Philadelphia Arms Fox which I am very happy with, but the back trigger does not cock about half the time. Not sure if there is a quick fix or if I just need a pro to look at it. The safety button is a little sticky and that may be part of the problem or another problem
Re: Back trigger not cocking
Posted: Sat Sep 20, 2014 12:58 pm
by bbman3
Mills sorry I have never worked on this type Fox.Like you say a good cleaning might correct your problem.Bobby
Re: Back trigger not cocking
Posted: Sat Sep 20, 2014 8:43 pm
by DarylC
Mills;
Pretty sure the old girl just needs a good cleaning. Tell us more about your Phila. Arms.
Daryl
Re: Back trigger not cocking
Posted: Sun Sep 21, 2014 7:51 am
by Mills
I will post some pictures when I have a chance to get some good ones. It is 18xx serial number range, 30" bbls, wood might be a replacement or refinish but looks good. 12 gauge, obviously.
Re: Back trigger not cocking
Posted: Sun Sep 21, 2014 8:03 am
by Silvers
Mills, you'll want to look for wood interference with the hammer sear, weak sear spring, or sear tip/hammer knotch modified or worn.
Re: Back trigger not cocking
Posted: Sun Sep 21, 2014 11:42 pm
by fox shooter
Mills, pull the trigger plate and the hammers are exposed. Check the stirrup that pushes the hammer, then check for any obstruction between the sear and hammer notch. My stirrup was worn through at the pin and was barely hanging on. Cleaning is a plus, it should be an easy fix. Lots of good advice on this forum!
Chris.............AZ
Re: Back trigger not cocking
Posted: Mon Sep 22, 2014 8:16 am
by Mills
Thanks for all of the help!
Re: Back trigger not cocking
Posted: Sun Sep 28, 2014 6:50 pm
by Stan Hillis
Mills,
If you can't straighten this out yourself I can recommend a 'smith that can resolve this for you, within easy driving distance.
Stan