Page 1 of 1
Forends loose on Fox
Posted: Wed Oct 24, 2007 1:09 am
by FOXIST
I notice the other day that three of my ejector Foxes have a slight play in the forend. Is this common on ejector Foxes? I know that the forend lug is under alot of strain when the ejectors are being cocked. do any of you have this problem on ejector guns? I might be barking up the wrong tree. Paul
loose forend
Posted: Wed Oct 24, 2007 10:58 am
by al smith
I have an A grade extractor gun with a slightly loose forend so the problem may not be specific to ejector guns. Any ideas for an adjustment or fix?
Posted: Wed Oct 24, 2007 4:05 pm
by Silvers
Paul, I just checked three graded ejector guns. None of them have any perceptible play in either the cocked or in the fired mode. Frank
Posted: Thu Oct 25, 2007 1:18 am
by FOXIST
al smith and Silvers thanks for the replies. I think it just must be a coincidence that the ejector guns have loose forends. al smith I am not one to tinker with the fitting of bbls, action and forend so I wouldnt have a clue on how to tighten them. Thanks Paul