Barrel firing sequence

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
dnj21
Posts: 12
Joined: Mon Jul 30, 2012 11:29 am

Barrel firing sequence

Post by dnj21 »

Recently got my newly acquired 1920 Sterlingworth back from the gunsmith's initial review and discovered that the left barrel fires via the front trigger. My other SxS's fire the right barrel with front trigger. Is this unique to the Sterlingworths or just an oddity?

Nothing on my factory letter from Mr Callahan about any special options when ordered.

Thank you,
Dave
fullchoke16
Posts: 426
Joined: Fri Jan 05, 2007 11:17 pm
Location: Western PA
Been thanked: 1 time

Re: Barrel firing sequence

Post by fullchoke16 »

Sounds like it was built for a southpaw shooter.
Recoil is most noticed when I miss
Twice Barrel

Re: Barrel firing sequence

Post by Twice Barrel »

Obviously at some time the triggers were reversed either to accommodate a left hand shooter or my guess they were removed and replaced in the wrong locations by someone with minimum double gun knowledge or who wasn't paying attention. Your problem is easily corrected by removing the trigger plate, driving out one very small pin and switching the triggers back to their normal position.
dnj21
Posts: 12
Joined: Mon Jul 30, 2012 11:29 am

Re: Barrel firing sequence

Post by dnj21 »

Is there a quick tutorial availible on this site showing how to remove the triggerplate? I am in a rural area and this time of the year the gun smith I use is covered up with deer rifles I am sure.

Thank you,
Dave
David D
Posts: 20
Joined: Sun Sep 09, 2012 4:06 pm
Location: 1000 Islands NY & Central Florida

Re: Barrel firing sequence

Post by David D »

go to the Homepage and there is a great step by step tutorial on disassembling your Fox. I disassebled my Fox last week for the first time and it was simple. You should utilize gunsmith screw drivers (not tappered) or you may bugger up your screws. I bought a cheap ($30) set at the gun shop that worked fine, although I did have to reduce (Dremel) the width of a few blades to fit correctly.

Good Luck, Dave
I love all of my SxS's, especially my Grade A Fox made in Utica NY
Scott
Posts: 283
Joined: Sat Jan 06, 2007 7:05 pm
Location: New York

Re: Barrel firing sequence

Post by Scott »

I would also check the chokes just to be sure that some left hander did not open the left barrel. Let's say it was Right barrel Modified and Left barrel Full. If they changed it for a left hander they may have left the right barrel alone and opened up the Left barrel from Full to IC. This way you were still using the open barrel with the first trigger.
I have seen it before.
Scott
If you find yourself in a fair fight, your tactics suck
xewizzard

Re: Barrel firing sequence

Post by xewizzard »

Being a left handed shooter I have often contemplated exchanging the Fox trigger positions. As I age I find it more difficult to reach around the back trigger to get to the front trigger. I much prefer the double trigger flexibility and have decided to live with the standard configuration.

As for the "first trigger" that depends on the distance to the dog's "p'int". Often that distance calls for the tighter choke initially and then the more open choke as the shooter walks up to the "p'int".

My 1934 Superposed Lightning has the Twin Single Triggers. That setup provides the ultimate flexibility (for me).
Post Reply