problem with 12ga Sterlingworth

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
jack_of_all
Posts: 2
Joined: Thu Sep 13, 2007 6:32 pm

problem with 12ga Sterlingworth

Post by jack_of_all »

I have a 12ga Sterlingworth made in 1910-11. It has a problem with doubling. In other words, when I pull one trigger, both shells fire. It has dual triggers. I assume this will be an expensive problem to repair, maybe more money than the gun is worth. Do any of you have any knowledge of what causes this problem? Can you give an estimate of what it might cost to repair? Can any one recommend a good gunsmith in the Seattle area? Thanks for any help you can provide.
Top
jack_of_all
Posts: 2
Joined: Thu Sep 13, 2007 6:32 pm

Post by jack_of_all »

I should have mentioned that the problem does seem to be caused by recoil because it does not double when using snapcaps. With live ammunition it will double regardless of which trigger is pulled first.
Top
bbman3
Posts: 1658
Joined: Fri Jan 05, 2007 10:13 pm
Location: Deep South
Has thanked: 236 times
Been thanked: 136 times
Contact:
Contact bbman3

Post by bbman3 »

Jack, check to see if trigger guard bow has been bent and is touching the triggers. I had a 20 Fox that was doubling and that was cause. It could very well be swollen wood causing the sears to not fully cock. If you get a smith to work on you trigger pulls be certain he is very experinced in that type work. I have found that Foxes tend to get heavier trigger pulls than lighter in useage. Bobby
Top
Post Reply

Return to “Fox Collectors Forum”