Page 1 of 1
Sterlingworth Stock Removal
Posted: Sun Jan 23, 2011 9:24 am
by tudurgs
What's involved in removing the stock on my Sterlingworth? Would like to the internals of the receiver. Thanks.
Re: Sterlingworth Stock Removal
Posted: Sun Jan 23, 2011 9:42 am
by Fin2Feather
Go to the home page; at the top under Mechanisms/Identification Styles is a pictorial that will guide you through.
Re: Sterlingworth Stock Removal
Posted: Sun Jan 23, 2011 9:55 am
by tudurgs
F2F - Thanks. Good, clear pictures and instructions
Re: Sterlingworth Stock Removal
Posted: Thu Feb 10, 2011 10:41 am
by Germantown
Not to sidetrack your thread, but I have had several sidelocks restocked or existing stocks repaired by Jerry Andrews in West VA. I have a Utica 20 bore Sterlingworth that at one time had the stock shortened for a young shooter. I have been using a Pachmayr slip-over pad, but will eventually sent it to him and have him splice on a fitting grained walnut extension and install a period solid red pad. My gun was made in about 1935- has 26" open choked barrels, double triggers and ejectors and at 6 lbs. is a joy to carry all day in the coverts- His e-mail is:
jskve@aol.com