Fox Gun Club Patch.....

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
MarketHunter
Posts: 51
Joined: Tue Apr 27, 2010 1:40 pm
Been thanked: 5 times

Fox Gun Club Patch.....

Post by MarketHunter »

PLEASE READ ENTIRE POST BEFORE DOING ANYTHING

We've been fine tuning the manufacturing on the smaller patches and we've got them as close to a vintage style as you can get in these modern times.

Embroidered on a big thick gorgeous wool felt, we really went all out with this one. I just have the prototype, I'm going to take money for 30 days then order whatever gets paid.

Made in the USA as with everything you get from me.

$13.50 EACH plus .68 cents shipping for up to three patches. If you order more than three I might have to bump up the shipping a little. Payment is by CHECK or MONEY ORDER only to preserve what little of my sanity is left.

Message for the payment address.

These are absolutely the best small patches I've done so far, I'm really pleased how these turned out. Once I order them it might be the only time they're available so don't miss out.

This is being advertised on the main page by permission of the President of the Club.
Attachments
FoxPatch.jpg
FoxPatch.jpg (116.16 KiB) Viewed 422 times
TOOL MAN
Posts: 1333
Joined: Mon Jan 08, 2007 1:05 pm
Location: The NUTMEG State
Has thanked: 25 times
Been thanked: 148 times

Re: Fox Gun Club Patch.....

Post by TOOL MAN »

TTT......limited time offer. Don't delay.
On the whole....I'd rather be in Philadelphia....
ROMAC
Posts: 1176
Joined: Sat Apr 18, 2009 11:16 pm
Location: SE PA
Has thanked: 511 times
Been thanked: 515 times

Re: Fox Gun Club Patch.....

Post by ROMAC »

I ordered one and sent the check this weekend. Figured "What the heck, why not"

I probably have that much $ in loose change in my truck console.

Glad I did because if its' a one run and done, I'd be pining for one later.
"Somehow, the sound of a shotgun tends to cheer one up" -- Robert Ruark
vaturkey
Posts: 3030
Joined: Wed Nov 26, 2008 6:33 pm
Location: Hamilton, VA
Has thanked: 445 times
Been thanked: 738 times

Re: Fox Gun Club Patch.....

Post by vaturkey »

Sent the check in for 2. Figured I will find a use.

Would look good on an upland shooting shirt.
MarketHunter
Posts: 51
Joined: Tue Apr 27, 2010 1:40 pm
Been thanked: 5 times

Re: Fox Gun Club Patch.....

Post by MarketHunter »

Few orders coming in off the website here, I'm going to give it a couple more weeks. If you want one this will likely be the only time they're available so don't hesitate to get in touch.
TOOL MAN
Posts: 1333
Joined: Mon Jan 08, 2007 1:05 pm
Location: The NUTMEG State
Has thanked: 25 times
Been thanked: 148 times

Re: Fox Gun Club Patch.....

Post by TOOL MAN »

TTT........
On the whole....I'd rather be in Philadelphia....
Carver
Posts: 23
Joined: Mon Nov 11, 2019 5:30 pm
Has thanked: 85 times
Been thanked: 16 times

Re: Fox Gun Club Patch.....

Post by Carver »

I sent a pm this past Saturday, but did not get a reply...
TOOL MAN
Posts: 1333
Joined: Mon Jan 08, 2007 1:05 pm
Location: The NUTMEG State
Has thanked: 25 times
Been thanked: 148 times

Re: Fox Gun Club Patch.....

Post by TOOL MAN »

Carver,

If you don't hear back in the next day or two, feel free to contact me at:
cambo6789@gmail.com
and I'll make sure you get a response. Last we spoke, Destry had @100 inquiries for the patch, so I'm guessing he's just trying to catch up.----SC
On the whole....I'd rather be in Philadelphia....
MarketHunter
Posts: 51
Joined: Tue Apr 27, 2010 1:40 pm
Been thanked: 5 times

Re: Fox Gun Club Patch.....

Post by MarketHunter »

OK, I'm cashing checks tomorrow and making the formal order on Friday. I'll have a handful of spares in case we get a late pay.
User avatar
Jeff S
Posts: 2750
Joined: Tue Jan 06, 2015 10:59 am
Location: Grand Rapids, Michigan
Has thanked: 1231 times
Been thanked: 733 times

Re: Fox Gun Club Patch.....

Post by Jeff S »

Market hunter. Please sign me up for two. I'll mail the check today.
TOOL MAN
Posts: 1333
Joined: Mon Jan 08, 2007 1:05 pm
Location: The NUTMEG State
Has thanked: 25 times
Been thanked: 148 times

Re: Fox Gun Club Patch.....

Post by TOOL MAN »

LAST CALL gents. Don't miss out!!!
On the whole....I'd rather be in Philadelphia....
Post Reply