Page 1 of 1
SP barrel onto A Grade Savage Fox
Posted: Thu Jul 07, 2022 4:46 pm
by Old Colonel
Can SP barrels be fitted on to an A Grade Savage Fox?
I have an A Grade with 32 inch barrels and would like to add some shorter barrels.
Re: SP barrel onto A Grade Savage Fox
Posted: Thu Jul 07, 2022 5:49 pm
by Researcher
I would imagine the SP-Grade barrels could be fitted to an A-Grade frame, but they are profiled differently along the bottom.
Re: SP barrel onto A Grade Savage Fox
Posted: Thu Jul 07, 2022 6:15 pm
by Old Colonel
Given the profile difference am I better starting with a Sterlingworth barrel?
Re: SP barrel onto A Grade Savage Fox
Posted: Thu Jul 07, 2022 7:06 pm
by vaturkey
Old Colonel wrote: ↑Thu Jul 07, 2022 6:15 pm
Given the profile difference am I better starting with a Sterlingworth barrel?
Lug will have to be changed out on the Sterly barrel to an A grade lug to use the Deely latch I believe. PS. I tried to fit a SP Barrel on a CE 20. It was a no go for the reasons stated above.
Re: SP barrel onto A Grade Savage Fox
Posted: Sat Jul 09, 2022 11:22 am
by Fin2Feather
I have a Philly A grade 20 with snap-on forend; my Utica Sterly 20ga barrels pretty much buckled right up to it. But that was snap-on to snap-on, and I never went any farther with it than just trying it
Re: SP barrel onto A Grade Savage Fox
Posted: Mon Jul 18, 2022 1:00 pm
by Brian Dudley
Fitted for basic function, yes. Fitted for proper fit cosmetically, a lot of extra work. I have done it. It requires welding and file work to get everything as it should be on the bottom. Yes, a set of SW barrels would put you further along, except for the FE lug. The best would be to find a set of graded barrels to start with.