Frequently I’ll hear members use the terms “caretaker” or “custodian” when referring to firearms that they own. Well, I’m the current “caretaker” of a 1944 Walther P 38 handgun (9 mm).
Since I consider this old holster a bit of a treasure, I figured I should contact our resident leather expert, Kevin McComack (Spoorns). Kevin has been restoring leather gun cases for years and is knowledgeable as to what products are best. Kevin recommended using Leatherique Rejuvenator and Cleaner.
I spent a good 45 minutes rubbing the rejuvenator into the leather, taking special care to thoroughly soak the stitching and flexible areas. Once this was complete, I put the holster in an enclosed plastic tub (with a colored lid) and left it in the Florida sun for about 7 hours. Per the instructions, this allows the “rejuvenator” to soak into the leather. The next step was to rub the Leatherique “cleaner” into the leather and then gently buff the surface. The end result looks pretty good. The light mildew is gone and I feel like I brought a little moisture back into the leather. Realistically, WWII mementos will become less cherished as time marches on, but at least I’ve added a life to this old piece of leather.
The gun itself is in pretty good shape, but the 1934 Dresden holster was in need of some TLC, having spent the last 60 years in my dad’s basement. 1944 Walther P38
- Jeff S
- Posts: 3138
- Joined: Tue Jan 06, 2015 10:59 am
- Location: Grand Rapids, Michigan
- Has thanked: 1801 times
- Been thanked: 1238 times
Re: 1944 Walther P38
Well done, Jeff! I became a believer in the Leatherique process years ago when a friend asked me to restore a Civil War belt cartridge box that was so brittle he'd never fully opened the lid for fear of it breaking off the hinge. Using their same process, it turned out very supple and flexible, safe to handle and carry. Kevin
-
- Posts: 1672
- Joined: Mon Jan 08, 2007 2:07 pm
- Location: Adirondack Mountain foothills
- Has thanked: 99 times
- Been thanked: 167 times
Re: 1944 Walther P38
Well done. Thanks Jeff & Kevin for sharing the tip.
tjw
tjw
IN GOD WE TRUST. SPE Skeet & Uplands and AH Fox vent rib guns a specialty
-
- Posts: 1665
- Joined: Tue Jan 16, 2007 11:53 pm
- Location: Western, MI
- Has thanked: 804 times
- Been thanked: 894 times
Re: 1944 Walther P38
Jeff,
Thanks for sharing the process and recommendations on use. The holster looks like it turned out fantastic and cleaned up nicely. Well done!
Thanks for sharing the process and recommendations on use. The holster looks like it turned out fantastic and cleaned up nicely. Well done!
Regards - Foxnut
-
- Posts: 1155
- Joined: Sat Oct 25, 2008 11:04 am
- Location: People's Republic of Maryland
- Has thanked: 1210 times
- Been thanked: 394 times
Re: 1944 Walther P38
Nice job Steggy. Now go out and pop some caps in the baby.
Owning a Fox is not a spectator sport.