Recommendation for Rejoint FoxC

Post your questions or seek advise regarding gunsmithing, restoration, repairs, ballistics, etc, etc.
Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
gilrussell
Posts: 18
Joined: Tue Nov 20, 2007 12:25 pm
Location: Southern AZ

Recommendation for Rejoint FoxC

Post by gilrussell »

I have just finished restocking a C Grade and I am pretty pleased with the results. I would like to get a nice rejoint to complete the restoration as it is a tiny bit off face. Any recommendations would be most appreciated. Thanks! Gil Russell
Too much of a good thing is....wonderful. M. West
Top
Big Friend Ten
Posts: 212
Joined: Sat Jan 15, 2011 4:38 pm

Re: Recommendation for Rejoint FoxC

Post by Big Friend Ten »

Brad Bachelder put more than a few guns back on face for me.

Brad can correct a little off-face using a Micro Welder making the fitting a fast turn-around job.

Mark
Top
Post Reply

Return to “"Technicana" and Restoration Forum”