HE receiver size

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
dennyibrandt
Posts: 67
Joined: Sun Apr 28, 2013 11:39 am

HE receiver size

Post by dennyibrandt »

Did Fox produce two receivers of different weight for the 12ga HE?
Top
User avatar
Silvers
Posts: 5188
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1232 times
Been thanked: 1880 times

Re: HE receiver size

Post by Silvers »

Thanks for being a member of the AHFCA. Most HE Grade Super-Fox guns were made up using an oversize 12 gauge frame that's been called the Magnum or 0-Frame, and with heavy 0-weight barrels. And a small number of lighter weight Super-Foxes were built on 12 gauge regular size frames and with 1-weight barrels. The latter supplied when a lighter weight HE was ordered. I had one that was ordered and finished at 8-1/4 pounds with 32-inch barrels, and I've seen/inspected several others over the years. Silvers
Last edited by Silvers on Fri Jan 03, 2014 8:50 pm, edited 2 times in total.
Top
dennyibrandt
Posts: 67
Joined: Sun Apr 28, 2013 11:39 am

Re: HE receiver size

Post by dennyibrandt »

Thanks for quick reply. Too cold to do much except Foxify. The gun is about 8.5# and has 0 weight barrels! DEN
Top
User avatar
fox-admin
Site Admin
Posts: 4165
Joined: Fri Jan 05, 2007 4:46 pm
Has thanked: 780 times
Been thanked: 2175 times

Re: HE receiver size

Post by fox-admin »

You may want to get a copy of DGJ Winter 2011, I wrote an article about the 12ga Super Fox with lots of facts and specs. A Super Fox built with 0 barrels should measure about 2.420 across the breech. Craig Larter
Top
loggy
Posts: 1115
Joined: Sat Apr 14, 2007 1:33 pm
Location: idaho
Has thanked: 412 times
Been thanked: 248 times

Re: HE receiver size

Post by loggy »

Mr. Tom Kidd wrote another DGJ article for the summer 1996 edition. It featured a couple of HE guns built for Henry Bartholomew. Bartholomew was a good friend of Nash Buckingham. They were built on the standard no 1 frame and not the normal 0 Super Fox frame. I have seen other heavy standard frame guns that were not marked as HE. Bartholomew was evidently a good enough customer to have a gun called what ever he wanted. Nothing wrong with taking care of the customer.
Top
Post Reply

Return to “Fox Collectors Forum”