Barrel length and issues of desirability

NO ITEMS MAY BE POSTED FOR SALE ON THIS FORUM or direct references to items for sale. This includes, but is not limited to, the following: A personal item that’s obviously for sale or would appear to be for sale; or if a link is posted to some other site where the item is for sale. Please note that references to items posted elsewhere are ok for discussion as long as a direct link is not included. Any "Wanted to Buy" posts are not allowed and will be removed. The moderators will delete any posts that are deemed offensive, abusive or slanderous in nature. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services
Post Reply
wscovell
Posts: 10
Joined: Thu Oct 04, 2007 6:56 pm

Barrel length and issues of desirability

Post by wscovell »

Hi all,
Posted a few weeks back about a 16ga SW I picked up locally. Never put a tape measure to it, but assumed it was a 28" M/F as that's what the seller told me. Anyway a couple of days ago I was measuring LOP out of curiosity (14") and threw the meaure to the bbls-turns out they're 30". Truthfully they did feel a little longer than the 28" that I shoot in another gun. I know from reading here and elsewhere that the 32" bbls are uncommon and command a bit of a premium, but would this hold for the 30" as well vs the 28" or 26"? I don't have the means to check the choke constrictions but am wondering if they aren't F/F. Again the only patterning I've done was on pheasants in ND last week and even w/ the low pressure Polywad Vintagers in 2.5" was smoking them in my right bbl. TIA, Bill
DGKaas
Posts: 201
Joined: Sun Jan 28, 2007 7:28 pm
Location: Philadelphia

Post by DGKaas »

I think most folks these days would consider a 30" 16g SW a good find. I not sure they are worth a lot more $ than the very common 28" but all things being equal the 30" gun would sell a bit quicker.
User avatar
Fin2Feather
Posts: 1110
Joined: Sun Jan 07, 2007 10:15 am
Location: Kansas High Plains
Has thanked: 322 times
Been thanked: 313 times

Post by Fin2Feather »

I believe the standard choke on all Sterlingworths was M/F; maybe they could be special ordered otherwise?
Utica Fox Appreciation Society - Charter Member
Researcher
Posts: 6253
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 482 times
Been thanked: 2497 times

Post by Researcher »

The normal chokes for Sterlingworths were cylinder (later improved cylinder) and modified in the 26-inch (Brush), modified and full in both the 28-inch (Field) and the 30-inch (Standard), and full & full in the 32-inch (Trap). However, other chokes could be ordered. I have a 1928 16-gauge Sterlingworth Ejector Field that left North 18th Street and Windrim Avenue improved cylinder and modified.

While the 30- and 32-inch barrels were offered beginning to end in the Fox smallbores, they apparently didn't sell many, and they seem to be more common in graded guns then Sterlingworths. I've recorded one 30-inch and one 32-inch in 20-gauge Sterlingworths. About 10% of the 16-gauge Sterlingworths I've recorded are 30-inch, but I haven't recorded a single 32-inch 16-gauge Sterlingworth.
Share the knowledge
User avatar
Silvers
Posts: 5188
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1228 times
Been thanked: 1880 times

Post by Silvers »

Sorry I haven't been on the Fox site in a while; I just returned from a hunting trip and am catching up.

For whatever it's worth over the past year or so I've talked with more and more gents at courses and my regular haunts who are looking for SxS's in 20 and 16 with 30" barrels, and 32" 12's. Most are willing to pay a premium to get the longer tubes. I think it's a carryover from the trend toward 32" over & unders on sporting courses. I have to agree the longer barrels seem to point and swing better but of course that's a personal choice that's pretty subjective. The shortest SxS I own is a Model 21 Skeet gun with 26" barrels and although I shoot it well, it just feels uncomfortable to me. That's probably because most of my double guns are 30 or 32-inchers.

A friend has a 20 gauge Sterlingworth with 32" barrels. I've handled the gun and think it's a bit too much of a good thing. Silvers
Aan
Researcher
Posts: 6253
Joined: Sun Jan 07, 2007 7:18 pm
Location: WA/AK
Has thanked: 482 times
Been thanked: 2497 times

Post by Researcher »

Would that "friend" be Morris Baker with 32-inch 20-gauge Sterlingworth 257,3xx?? He left it with me in the PGCA tent for a couple of hours at The Vintage Cup, but came back for it and wouldn't name a price.
Share the knowledge
User avatar
Silvers
Posts: 5188
Joined: Sat Jan 06, 2007 9:28 pm
Location: Between Phila and Utica
Has thanked: 1228 times
Been thanked: 1880 times

Post by Silvers »

Yes Dave, the 20 gauge 32"Sterlingworth belongs to Morris. As you know he has a way of finding some unusual pieces. Frank
bamboozler
Posts: 379
Joined: Fri Jan 05, 2007 8:52 pm
Location: Wisconsin
Has thanked: 3 times

Post by bamboozler »

Silvers wrote:

A friend has a 20 gauge Sterlingworth with 32" barrels. I've handled the gun and think it's a bit too much of a good thing. Silvers
I, too, handled that gun at the Upper Penninsula Side-by-Side Classic and came away with exactly the same conclusion. It is a rare bird, nonetheless.
wscovell
Posts: 10
Joined: Thu Oct 04, 2007 6:56 pm

Post by wscovell »

Thanks for all of the input guys. I took the SW out to ND a couple of weeks ago and out of the various guns I brought (a Win M12 16ga, Merkel 1620, and A-5) the SW is the one I ended up shooting all week. I had just purchased the Fox a few weeks before (my first) and LOVED the way it balanced in my hand on those long walks and more importantly how it swung w/ the 30" tubes. My confidence in right to left crossers, which is my weakest shot, soared.

Somewhat off topic, but I'm keeping my fingers crossed for the find/deal of a lifetime on a super clean, orig condition Parker 28ga VHE. Shoud come to pass Friday/Sat if my stars are aligned. I'll post pix here if it happens (and have to join the PGCA site too, I guess).
Best :D
Post Reply