200371 “Slim”

Use this area to post pictures of you favorite Fox custom project or share information about custom projects. Commercial operations or businesses may not advertise nor appear to advertise their products or services, either directly, or indirectly by a second party, except for simple reference as a source for such products or services

Re: 200371 “Slim”

Postby Stan Hillis » Sat May 16, 2020 6:39 am

Brian Dudley wrote:I should clarify my previous statement that it is MY opinion that it is the proper way to do it (checker after finish). And many feel the same way. I am in a checkering group on FB and whenever someone posts something related to checkering before finish the responses in favor of doing it after are easily 12 to 1.

I personally only see checkering before hand being useful if a finish is being sprayed where the checkering would be masked. But even then, the wood should really at least be sealed and partially filled in order for it to make sense (to me). Checkering totally raw wood just baffles me. but... some people do it. And a common pro I hear is about mistakes being more easily fixable. I suppose that is true. If you are prone to making mistakes and that is something you worry about.

If a time consuming hand rubbed finish is being applied to an already checkered stock the checkering WILL have to be cleaned up after the job is done, which means more work in the end. And if the one finishing is not the one checkering... then what? it goes back and forth more?

Personally, the only time I do any sort of checkering work before finish is in the case of a organic fill-in pattern (NOT a point pattern) that is intricate on the shape. I will lay out and lightly cut in the outline only of the pattern before finish. That way I can work through the design before hand and if something needs to be adjusted, it can be done without having to worry about a finish being there.
that way when the finish is done and it comes time to checker, the outline is there in the wood. it just has to be gone over and start cutting the spacing lines for the checkering.

If one is concerned about marking up a good finish, tape and things can be used to protect surrounding areas. Again, it is the only way that makes any sense to ME.


Years ago at a gun show a guy asked me about checkering a stock for him. He said he wanted to shape the stock and have it checkered and then he could do the finish. I told him that I checker after finish so he could give it to me after he had it done. He looked at my totally disgusted and just walked away without saying a word more. I guess he was in the "checker before" camp.



Thanks, Brian.
Stan Hillis
 
Posts: 1746
Joined: Sun Nov 09, 2008 9:31 pm
Location: Jawja

Re: 200371 “Slim”

Postby Fox20obsessed » Sun May 17, 2020 6:43 am

Jeff and Bill thanks for the compliments. Stan thanks for your addition. Last time I checked, there is more than one way to skin a cat fellas.
-Matt
Last edited by Fox20obsessed on Sun May 17, 2020 7:48 am, edited 2 times in total.
Fox20obsessed
 
Posts: 112
Joined: Mon Dec 30, 2019 2:10 pm

Re: 200371 “Slim”

Postby Bob Jurewicz » Sun May 17, 2020 7:38 am

Just a comment about absence of responses to posts. The PGCA Site has a very nice feature for those wishing to express their appreciation for a post .
It is a simple feature for each post whereby you can click a "button" and you name appears at the bottom of the post as a "thank you" to the poster for his effort and content.
Bob Jurewicz
Bob Jurewicz
 
Posts: 17
Joined: Wed Nov 14, 2007 11:01 am
Location: SWNYS

Re: 200371 “Slim”

Postby jolly bill » Sun May 17, 2020 7:43 am

Bob Jurewicz wrote:Just a comment about absence of responses to posts. The PGCA Site has a very nice feature for those wishing to express their appreciation for a post .
It is a simple feature for each post whereby you can click a "button" and you name appears at the bottom of the post as a "thank you" to the poster for his effort and content.
Bob Jurewicz

Bob,

This would get a "Thumbs Up".
jolly bill
 
Posts: 953
Joined: Sun Jan 21, 2007 11:06 pm
Location: Western NY

Re: 200371 “Slim”

Postby vaturkey » Sun May 17, 2020 10:01 am

We just need a thumbs up added to where the Smilies are. :)
User avatar
vaturkey
 
Posts: 2036
Joined: Wed Nov 26, 2008 7:33 pm
Location: Hamilton, VA

Re: 200371 “Slim”

Postby bbman3 » Sun May 17, 2020 10:07 am

Outstanding job and i know how hard it is as i have restocked many from scratch. Bobby
bbman3
 
Posts: 1324
Joined: Fri Jan 05, 2007 11:13 pm
Location: Deep South

Re: 200371 “Slim”

Postby Fox20obsessed » Wed May 20, 2020 7:58 pm

Thanks Bobby and Tom 8) I agree with Bob, that would be a nice feature to add to the site. I had some time recently and got my new forend screw fitted up and blued it to match the forend as best I could. I have attached pics of the screw I used for mock-up and then the new, fitted machine screw. I got 3 coats of finish on the forend now and it’s starting to come together nicely.
Thanks for looking...
-Matt
Attachments
093C2627-F6EC-4490-8B93-7EDBDD54C775.jpeg
12DB4567-93D0-4C14-BAB4-233333326552.jpeg
Fox20obsessed
 
Posts: 112
Joined: Mon Dec 30, 2019 2:10 pm

Re: 200371 “Slim”

Postby Fox20obsessed » Tue May 26, 2020 9:12 am

3 coats of finish applied now. Here is the new wood beside the original.
Thanks,
-Matt
Attachments
6610271F-E018-4B43-9E13-3A491E7304BA.jpeg
Fox20obsessed
 
Posts: 112
Joined: Mon Dec 30, 2019 2:10 pm

Re: 200371 “Slim”

Postby Brian Dudley » Tue May 26, 2020 11:40 am

Good match in figure from old to new.
,Brian Dudley
Brian Dudley
 
Posts: 165
Joined: Fri Aug 17, 2012 3:09 pm
Location: Rochester, NY

Re: 200371 “Slim”

Postby Jim Cloninger » Tue May 26, 2020 12:42 pm

Nice work!
Goodbye Mandy, once in a life time hunting dog. I miss you every day.
Jim Cloninger
 
Posts: 1136
Joined: Wed Jul 25, 2007 12:14 pm
Location: West

Re: 200371 “Slim”

Postby Jeff S » Tue May 26, 2020 1:38 pm

Beautiful woodwork.
Jeff S
 
Posts: 1298
Joined: Tue Jan 06, 2015 11:59 am
Location: Grand Rapids, Michigan

Previous

Return to Custom Fox Guns

Who is online

Users browsing this forum: No registered users and 1 guest