Fox Collectors

Both have found new homes, Thanks guys

For anyone interested, I have two of the Fox Collectors banners that I am not using for display. Contact me by PM if interested. Thanks, Frank

Fox associated a “style” with the barrel lengths of its Sterlingworths: 26″ guns were Brush styles, 28″ guns were Field styles, 30″ guns were Standard styles, and 32″ guns were Trap styles. Hope that helps, I pulled it from an article I had seen.

I use a small flat blade screw driver with Gojo for a lubricant to lift the plugs out. If they were glued in the gojo will normally soften the glue. To clean them up I use Gojo and a scotch brite pad to remove the grunge.

Mike the repair was just fine, solder was completely hidden under each post platform. Turnaround was good as well at 3 weeks or so

Thanks all, the barrel was sent to Kody Kearcher. Price quoted was reasonable and I am waiting to see how the repair turns out.

Hey TW, yeah, I've seen how you handle a screwdriver!!!.. Actually two of the posts are short, causing the rib to dip and not remain perfectly straight. I will need to see if Jason has a couple once I get a smith lined up to do the work. I was hoping someone here has had post solder work done and co...

Seeking advice and recommendations on whom to send this SBT J grade barrel to. The soldered posts have been redone in the past but instead of the solder being fully under the post platform, it appears that the "smith" just soldered externally the post platform to the barrel. The tops of th...

Hey Tom, way cool, In my mind this Mock-up now becomes a salemans' tool to show how the SST works, Kind of like the same reason that the Fox Cutaway actions were done. The mock up allows you to cock both hammers, select the R/L sequence, squeeze the triggers and watch the response. You have cocked i...

Rick, I just happen to have a couple of those springs, shoot me an email at frankholley at comcast dot net..

TJW ( Marshfellow) is a most gracious host, and to see all the Fox stuff he has in his oversize man-cave, office, clubhouse, whatever? is a treat. Dave and I had a great time. Then after the checkering seminar, we proceeded to tear down a Fox or two for some internal inspections. Lots of fun and a f...

Dugan, I can probably help you with the safety slide, PM me the first 3-4 digits of the S/N and what grade Fox it is. Thanks, Frank

I just wanted to bring this thread back around. 32" SW guns, for the most part seem to fit the pattern of a zero in the hundreth's digit of the S/N. Dave add one more to you list . SN 117070. non ejector Bores are .730 and choke constrictions are .045" #2 weight. I wonder if there were oth...

I can help you with the parts. I have main springs and the ejector follower rods ( plunger with a split rod) for a 12 gauge frame. email me at frankholley@comcast.net
Thanks, Frank

VAT, thanks so much, I searched like H--L and could not find it.